2000 Dodge Intrepid Logo

Related Topics:

A
Anonymous Posted on Jun 27, 2014

Fuel line diagram 2000 dodge Intrepid 2.7 liter

Need to clean out fuel lines and gas tank so the engine will start

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Dec 22, 2008

SOURCE: belt diagram 2004 5.7 liter engine dodge ram 1500 1/2 ton 4x4

click on this link, and scroll down to 5.7L

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba71e

Ad

Anonymous

  • 490 Answers
  • Posted on Aug 13, 2009

SOURCE: Where is location of Fuel Filter(s) for 1987 Dodge Ram 50

look under the chasis it should be there.most times it is on the drivers side near the middle.

Anonymous

  • 38 Answers
  • Posted on Jun 14, 2010

SOURCE: which hose do I need to replace on my 1996 dodge intrepid

I dont know what its called, but i know what you're talking about, but you'll probably have to cut if off of the head, as it melts to it. These deteriorate quickly, and need replaced. You will have to purchase it from a dealership as parts stores dont carry it. Or try a junk yard, but chances are its as bad as the one you already have. Dont let them give you straight heater hose either, it will kink, some tard gave me some said it'd work, after 10 minutes of telling him it would kink, and taking it home and tryin it, it kinked. Bad idea.

Anonymous

  • 2309 Answers
  • Posted on Feb 07, 2011

SOURCE: diagram for 1996 dodge intrepid brake lines or

you should be able to route a line without removing the tank, just remove one strap at a time

Testimonial: "thank you for your response bad place to put a brake line"

Anonymous

  • 4803 Answers
  • Posted on Sep 05, 2011

SOURCE: i need a diagram of

There is no such diagram available. You will simply have to follow the fuel lines from the fuel rail on the engine along the truck frame rail towards the tank, or from the fuel tank along the truck frame rail towards the fuel rail on the engine. Some are on the left side frame rail and some are on the right side frame rail, depending on which engine your vehicle is equipped with. You simply have to LOOK.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000 dodge intrepid wont restart after running out of gas

find the fuel lines to the motor (silver line on top of fuel injectors) if there is a bleed valve (looks like a tire inflation valve) press it with something to open it (beware the spray) have a friend turn the motor over to see if you are getting fuel...if so when fuel line has pressure try starting again
3helpful
3answers

My 2000 dodge intrepid ran out of gas and i put sum rite back in but it wont restart it sounds like it wants to but it dosent

Hi Roshed, Did you put enough gas in? If car is not on level surface,it could take 3-4 gallons to supply fuel pump,which is inside fuel tank.You can check whether pump is working or not by removing filler cap and listening for a 'whirring' sound when an assistant turns the key to ON not START, just off to on.if you can't hear anything,check fuel emergency shut off; a circuit breaker,usually in the trunk,behind the carpet on inner fender 'wall' see owners manual.Check for blown fuse. If you tried starting before realizing it was empty,fuel pump will probably need to be replaced,as the fuel 'lubricates' the pump,and they're quickly damaged if run dry.Good Luck
0helpful
1answer

I have strong gas smell in my dodge 2000 interpid but i see no leaks anyway. also running out of gas faster.

Thanks for choosing FixYa and welcome. You may want to try a fuel cleaner and changing the fuel filter first if you haven't already. Check for any codes that may have came up if the check engine light is on. Check all your fuel lines and gas tank again. You may have a bad fuel injector so check them for sure. If one is leaking, fuel can be smelled. A simple tune up can help your gas mileage, as well as the cleaner. Check around the fuel filter for loose hoses. If you can access the fuel pump from your back seat, check in that area also. Check the engine block for leaks. Remember, if it is leaking there, the gas will evaporate before you notice leaking spots. Check all your lines behind the engine block and at the firewall. Are your rpm's jumping any? High idle? The throttle may need adjusted. You may be getting rich fuel as well. Check your catylactic convertor. There may be a leak around the fuel pump so that is an option also. If it is not in the back seat, you will have to pull the tank to check it though.
1helpful
1answer

I need a diagram of the fuel line from the engine to the tank on my 1994 dodge dakota, so i can find a gas leak

There is no such diagram available. You will simply have to follow the fuel lines from the fuel rail on the engine along the truck frame rail towards the tank, or from the fuel tank along the truck frame rail towards the fuel rail on the engine. Some are on the left side frame rail and some are on the right side frame rail, depending on which engine your vehicle is equipped with. You simply have to LOOK.
0helpful
2answers

Sugar in gas tank

not good needs whole sysyem flushed and some stuff like injectirs might have to be replaced along with fuel pump
2helpful
1answer
0helpful
1answer

Need to replace fuel pump on a 2000 Dodge Intrepid do I need to drop the fuel tank

Yes and its just 2 15mm bolts i believe and ur lines and filler neck will need the quick disconnect tools for the fuel line disconnect and can be bought at any parts stores. These are easy to do 1hr tops. Thanks Josh
2helpful
1answer

On my 2002 dodge intrepid the check engine light comes on, the code comes back as ''small leak in evaporation emmission system'' where is this system located at on my car? where can I get a drawing or...

Gas cap not tight is the most common issue....the system is fuel tank, lines and evap. canister.....but most pressure loss is cap related, as the rest of the system gets handled less often....
0helpful
1answer

2000 dodge intrepid fuel pressure port? i cant find location to check pressure

It's along the fuel injector rails. With the engine not running the fuel line primed should read 55psi and 46psi with the engine idling and the manifold vacuum applied for the 3.3 liter. With the engine not running the fuel line primed should read 48psi and 39 psi with the engine running and the manifold vacuum applied for the 3.5 liter. Good luck and hope this helps.
1helpful
2answers

How do you changs a fuel pump in a 1995 Dodge

You MIGHT not have to drop the tank. On the 95 LHS (same frame) you can go through the trunk. take the trunk lining out. Underneath it near the back seat there may be an access panel. If so it will make it MUCH easier to replace! Worth the time to check it out!
Not finding what you are looking for?

455 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...