What to reset after a code p0193 fixed - 2006 Ford Mustang

P0193 = Fuel rail pressure (FRP) sensor - high input There is a sensor in the fuel delivery system for the fuel injectors. This sensor needs to be checked. Get a Good Mechanic to deal with this as fuel systems can be pressurised and need to be repaired in a certain way.

Fault Code Definition P0193

• Fuel Rail Pressure Sensor Circuit High Input

What does this mean?
The Powertrain Control Module (PCM) needs to know the fuel pressure at all times so it can effectively control the fuel injectors and deliver the optimal amount of fuel into the engine's combustion chambers for maximum power and economy while maintaining the lowest tailpipe emissions.
Code P0193
indicates that the signal from the Fuel Rail Pressure Sensor and/or its circuit is too high, indicating a fuel pressure condition that is abnormally high.

Here's a video on your code. Check engine light diagnosis code P0193 Part 1

Recommend replace fuel rail pressure sensor, make sure connector and wiring are good, clear codes and recheck.

code p0193 refers to Fuel rail pressure (FRP) sensor -high input Possible causes ---wiring short to positive--- FRP sensor. I would replace the sensor with a genuine unit as after market units have different parameters and the cpu may keep bring up the code.

P0193 - Fuel Rail Pressure Sensor Circuit High Input

Possible causes- Excessive resistance in the circuit
- Low or no fuel
- Wiring harness connector of the fuel pressure sensor
- Fuel Rail Pressure Sensor (most common cause)
- Fuel Pump

Read more: http://engine-codes.com/p0193.html#ixzz2BZqwz5cc

If you have replaced the sensor, check the wires at the back of the plug. Pull them one at a time, if they stretch it is a broken wire. When you get a high reading code. It is either it's unplugged or a wire is broken.

Still i have p0193 fault and no pick computersay fuel rail sensor but i was diconect the first injector electric swich then this pro

first find out what the code is for. call autozone and tell them to look up the code and they will be able to give you a list of possiable causes, then go on and make your decision as to what you are going to do to fix the problem

these are not ford code numbers so refer to autozone where you had it checked ,they charged you for an incomplete job ,they should supply the information