Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jun 23, 2014

4l08e bind up in 3rd

After rebiuld

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1987s10 2.8v6 trains goes into neutral will not pull in 3rd or od4th

I had an '86 but no problem on this, only hing it could be if the linkage at the transmission binding somehow or something is stopping it from moving.
0helpful
1answer

Jaguar 2005 xjl 4.2 l shifting start to stick on 2nd or 3rd gears

check all shifter joints for loose , worn or binding pivots
1helpful
1answer

Sticking accelerator in my 97 rav4 what causes this and how do I fix it

Make sure floor mat is not compromising accelerator pedal operation. Check throttle cable for sticking and binding.... lube if necessary. Check throttle linkage at intake for sticking/binding and repair as necessary
1helpful
1answer

What is causing transmission to only work in 2nd and 3rd and reverse.? in 2nd and 3rd it feels like its trying to downshift into 1st. In 1st there is a little resistance but it doesnt move

How does your transmission fluid look and smell? If it is dark and smells a little burnt, the transmission is very likely toast. If it is still clear and red, you should let a transmission specialist diagnose it.
0helpful
1answer

ENG WAS OVERHEATING - PRESS TEST & REBUILT HEAD, TORQUED TO SPECS.NO MORE O/HEATING. NOW HAS WATER IN OIL PAN. THERE IS NO OIL COOLER ON THIS ENG. ANY SUGGESTIONS.

Hi,it might of got water from the water jacket when takeing off the head for rebiuld,I once had a toyota crown and I done a rebiuld and had the same thing,I found out that in the front of the head was a core-plug which actuly was behind the timing gear wich just went strait into the bottom of the sump,well I hope yours is the first diagnoses,all the best.
0helpful
1answer

Location of solenoids trailblazer

Sounds like a broken transmission or motor mount and is putting shift cable in a bind.
0helpful
1answer

Speedometer quit and transmission will not work in 3rd or drive but will in 1st and 2nd

i have a 2003 chev s-10 pickup with automatic/ 4 cyl I am not able to move shifter from park to drive i believe my shifter cable is binding
gears selection matches fine when shifting. But will not get out park go to reverse or neutral selection only drive, 3rd, 2nd and 1st
do i need to replace shifting linkage cable?
0helpful
1answer

It shifts from 1st to 2nd OK But will not shift from 2nd 3rd until way late and then acts as if it is slipping in 3rd. Seems work almost ok when it is cold 94 Ford E 150 conversion van

CHECK TRANSMISSION FLUID LEVEL.IF ALL IS GOOD YOUR 2 - 3 SHIFT VALVE IS STICKING OR BINDING.GOVERNOR VALVE STICKING.YOU COULD HAVE STICKING OR BINDING ACCUMULATOR VALVE 3 - 2 CONTROL VALVE TV LIMIT VALVE 1 - 2 OR 2 - 3 SHIFT VALVE TRAIN.CHECK THE VACUUM VALVE IF EQUIPPED.USE HAND HELD VACUUM PUMP.PUMP VALVE TO 15 HGS. IF IT HOLD VACUUM OKAY IF DONT HOLD VACUUM VACUUM VALVE NEED REPLACING.
45helpful
1answer

Power Fold Rear 3rd Row Seat on 2006 Ford Explorer will not raise. I can hear motor trying to raise seat. The gear does not appear to be turning. Motor hums like it is in a bind. What needs replacing?

Power Fold Rear 3rd Row Seat on 2006 Ford Explorer will not raise. I can hear motor trying to raise seat. The gear does not appear to be turning. Motor hums like it is in a bind. What needs replacing?
Not finding what you are looking for?

46 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...