CAN YOU TELL ME WERE IS THE LOCATION OF THE FORD EXPLORER
SOURCE: Location of the Oil Pressure Sending Unit
On the drivers front of engine block below the cylinder head & gasket . Slightly behind waterpump.
SOURCE: exact location of oil sending unit on a 95 ford
on OHV engine,at rear of engine block,just ahead of transaxle
on OHC on forward side above oil filter.
SOURCE: 98 ford explorer oil pressure sensor location
2.9L and 4.0L engines-Left side front of the engine, below the cylinder head in the engine block
SOURCE: location of oil sending unit?
Drivers side about 3" from the back about 2" from the oil pan. Will have a single black wire leading from it to the wire harness
Hope this helps
Please leave feedback Thanks
SOURCE: where is the oil sending unit on a 1996 ford
On 3.0L OHV engines, the oil pressure sensor is located on the left
side of the engine block above the flywheel. On 3.0L DOHC engines the
sensor is located on the left side of the engine block above the oil
filter. On 3.4L DOHC engines the sensor is screwed into the oil filter
adapter. The oil pressure sensor operates the oil pressure warning lamp.
Fig. 1: Location of the oil pressure sensor-3.0L OHV engines
Fig. 2: Location of the oil pressure sensor-3.0L DOHC engines
Fig. 3. The oil pressure sensor-3.0L OHV engine
Hope help with this (remember rated this help). Good luck.
53 views
Usually answered in minutes!
×