Wiper motor quit working. changed relays, fuse is ok, and got a new motor. What else can I check?
Do you have int wipers? If so check the int module its under the dash right side of the steering column I believe. Specifically check the solder joints.
I suggest you ensure the motor and the self-park is ok by providing it with a suitable direct feed and ground. If the motor functions normally the next stage will be to check the vehicle wiring to the motor is providing the required live connections and ground(s). The vehicle wiring diagram will help with this. Some wiper motors need to be connected directly to ground in order to work and because they are mostly mounted in rubber to reduce noise there is often an earth or ground strap that is easily missed when changing the motor.
Don't replace the motor yet.
It could be a fuse or at the switch.
It may not be a motor problem.
The wiper motor has 2 windings, fast and slow.
The wiper switch sends a ground signal to each motor winding.
There may be a problem on the relay, or at the switch or in the cable to the motor.
Hope this helps.
SOURCE: I have a1992 ford explorer the front and rear wipers quit workin
check for power at the wiper motor. If power at the wiper motor but no wiper action then replace the motor. if no power at the motor then use a jumper wire and put power to the motor. Does motor run? if so check for open circuit in the wire someplace.
SOURCE: 2002 ford ranger wiper problem replaced wiper
Check for blown fuses or go outside and turn the wiper on and see if you can hear the wipers trying to move. The bushings under the wiper arm might be stripped or not properly aligned. You might have a short somewhere also. Electrical problems can get expensive.
SOURCE: windshield wipers only work on high on 98 ford ranger
Try replacing relay for wiper with another same relay from fuse block from another working accessory.Had same issue on friends Ford Ranger. Moved relays and cleaned harness connection at fuse block. Works fine.
SOURCE: 1987 Ford Thunderbird. The windshield wipers not working
You can't check these modules unless you have the specs on them.good luck on finding them, but if you do let me know please. I've had the same problems on fords. they hide these modules on the passenger side right side of the glove box, just under the dash. usually the only box there
4,404 views
Usually answered in minutes!
×