WHERE IS BANK 2 SENSOR 2 LOCATED ON 2005 HONDA PILOT?
SOURCE: Honda Pilot 2005 garage door programming
Hi,welcome . Homelink has a website and phone number for programing help contact.
HomeLink at 800-355-3515 or visit their
website at www.homelink.com. they have a very good support system to hep you with problems.
SOURCE: where are the 2 oxgyn sensors located
There's one located directly after your catalytic converter and the other one is located before your catalytic converter (somewhere between your headers and that cat)
Testimonial: "There are actually 2 sensors. One on the engine manifold and the second is on the atalitic (sp) converter. "
SOURCE: where is bank 1 sensor 2 located on a 2005 honda
4 or 6 cylinder engine.
It's the rear O2 sensor,the one behind the catalytic converter.
======
Clear the code with OBDII scanner or remove negative cable for 2 minutes.
Wait until the exhaust cool for 1 hours
Disconnect the connector and clean the contacts with CRC electrical contact cleaner the contacts.
reconnect negative battery cable
Start the car and let the motor warm up.
====
If the code keeps coming back then you will need to purchase a O2 sensor socket + O2 to change it out.
Please rate my answer if it's helpful to you.
Cheers,
Mustgo.
I
SOURCE: ON A 03 6 CLY ACCORD, WHICH SENSOR IS BANK 1
Bank 1 refers to which side the O2 sensor is on and Bank 2 refers to the actual sensor. Bank one is always on which ever side cyclinder #1 is on. In your case it will be on the back side towards the fire wall, and will be the O2 sensor that is past the catalylic converter (otherwise none as a downstream O2 sensor).
1--2--3
======
4--5--6
Front of car
SOURCE: Honda Odyssey 1999 wher is
The oxygen sensor for bank 1 sensor 1 is located just behind where the exhaust pipes from the front bank of cylinders and rear bank of cylinders join up. If you look under the car from the front and follow the exhaust pipes, it is the one you can see easily. There are only two oxygen sensors on the car---the one described above is bank 1 sensor 1. The other sensor goes into the side of the catalytic converter. It is bank 1 sensor 2.
4,307 views
Usually answered in minutes!
×