1992 Buick Park Avenue Logo
Posted on Jun 24, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1992 Buick Park Ave Engine light somes on intermittently. Goes out When you increase RPM pass 1500 or decellerate below 1000. Thanks! Dave

Answer This Question
  • rmzero Jun 24, 2009

    Hi! emissionwiz

    The light is amber and say service engine soon



    Dave

  • Marvin
    Marvin May 11, 2010

    IS THIS THE AMBER COLORED LIGHT?

×

1 Answer

Marvin

Marvin

Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

  • Buick Master 85,242 Answers
  • Posted on Jun 24, 2009
Marvin
Buick Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

Joined: Jun 20, 2008
Answers
85242
Questions
28
Helped
29055369
Points
266281

THIS LIGHT IS TURNED ON BY ONE OF WELL OVER 200 DIFFERENT PROBLEMS IN THE ELECTRONIC CONTROLS OF THE ENGINE. TRANSMISSION OR EMISSION CONTROL SYSTEM, IN ORDER TO HAVE ANY HOPE OF FINDING THE ROOT CAUSE THE DEALER MUST TEST THE SYSTEM WITH A SPECIAL SCANNER TO SEE WHAT TROUBLE CODES ARE PRESENT, BELOW U WILL FIND A PARTIAL LIST OF THE FAULTS THAT CAN BE PRESENT WHENEVER THE LIGHT IS ON..
P0001 Fuel Volume Regulator Control Circuit/Open
P0002 Fuel Volume Regulator Control Circuit Range/Performance
P0003 Fuel Volume Regulator Control Circuit Low
P0004 Fuel Volume Regulator Control Circuit High
P0005 Fuel Shutoff Valve Control Circuit/Open
P0006 Fuel Shutoff Valve Control Circuit Low
P0007 Fuel Shutoff Valve Control Circuit High
P0008 Engine Position System Performance (Bank 1)
P0009 Engine Position System Performance (Bank 2)
P0010 A Camshaft Position Actuator Circuit (Bank 1)
P0011 A Camshaft Position - Timing Over - Advanced or System Performance (Bank 1)
P0012 A Camshaft Position - Timing Over - Retarded (Bank 1)
P0013 B Camshaft Position - Actuator Circuit (Bank 1)
P0014 B Camshaft Position - Timing Over - Advanced or System Performance (Bank 1)
P0015 B Camshaft Position - Timing Over - Retarded (Bank 1)
P0016 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
P0018 Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
P0019 Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B)
P0020 A Camshaft Position Actuator Circuit (Bank 2)
P0021 A Camshaft Position - Timing Over - Advanced or System Performance (Bank 2)
P0022 A Camshaft Position - Timing Over-Retarded (Bank 2)
P0023 B Camshaft Position - Actuator Circuit (Bank 2)
P0024 B Camshaft Position - Timing Over - Advanced or System Performance (Bank 2)
P0025 B Camshaft Position - Timing Over - Retarded (Bank 2)
P0026 Intake Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0027 Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0028 Intake Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0029 Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0030 HO2S Heater Control Circuit (Bank 1 Sensor 1)
P0031 HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0032 HO2S Heater Control Circuit High (Bank 1 Sensor 1)
P0033 Turbo Charger Bypass Valve Control Circuit
P0034 Turbo Charger Bypass Valve Control Circuit Low
P0035 Turbo Charger Bypass Valve Control Circuit High
P0036 HO2S Heater Control Circuit (Bank 1 Sensor 2)
P0037 HO2S Heater Control Circuit Low (Bank 1 Sensor 2)
P0038 HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0039 Turbo/Super Charger Bypass Valve Control Circuit Range/Performance
P0040 O2 Sensor Signals Swapped Bank 1 Sensor 1/ Bank 2 Sensor 1
P0041 O2 Sensor Signals Swapped Bank 1 Sensor 2/ Bank 2 Sensor 2
P0042 HO2S Heater Control Circuit (Bank 1 Sensor 3)
P0043 HO2S Heater Control Circuit Low (Bank 1 Sensor 3)
P0044 HO2S Heater Control Circuit High (Bank 1 Sensor 3)
P0045 Turbo/Super Charger Boost Control Solenoid Circuit/Open
P0046 Turbo/Super Charger Boost Control Solenoid Circuit Range/Performance
P0047 Turbo/Super Charger Boost Control Solenoid Circuit Low
P0048 Turbo/Super Charger Boost Control Solenoid Circuit High
P0049 Turbo/Super Charger Turbine Overspeed
P0050 HO2S Heater Control Circuit (Bank 2 Sensor 1)
P0051 HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
P0052 HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0053 HO2S Heater Resistance (Bank 1 Sensor 1)
P0054 HO2S Heater Resistance (Bank 1 Sensor 2)
P0055 HO2S Heater Resistance (Bank 1 Sensor 3)
P0056 HO2S Heater Control Circuit (Bank 2 Sensor 2)
P0057 HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0058 HO2S Heater Control Circuit High (Bank 2 Sensor 2)
P0059 HO2S Heater Resistance (Bank 2 Sensor 1)
P0060 HO2S Heater Resistance (Bank 2 Sensor 2)
P0061 HO2S Heater Resistance (Bank 2 Sensor 3)
P0062 HO2S Heater Control Circuit (Bank 2 Sensor 3)
P0063 HO2S Heater Control Circuit Low (Bank 2 Sensor 3)
P0064 HO2S Heater Control Circuit High (Bank 2 Sensor 3)
P0065 Air Assisted Injector Control Range/Performance
P0066 Air Assisted Injector Control Circuit or Circuit Low
P0067 Air Assisted Injector Control Circuit High
P0068 MAP/MAF - Throttle Position Correlation
P0069 Manifold Absolute Pressure - Barometric Pressure Correlation
P0070 Ambient Air Temperature Sensor Circuit
P0071 Ambient Air Temperature Sensor Range/Performance
P0072 Ambient Air Temperature Sensor Circuit Low
P0073 Ambient Air Temperature Sensor Circuit High
P0074 Ambient Air Temperature Sensor Circuit Intermittent
P0075 Intake Valve Control Solenoid Circuit (Bank 1)
P0076 Intake Valve Control Solenoid Circuit Low (Bank 1)
P0077 Intake Valve Control Solenoid Circuit High (Bank 1)
P0078 Exhaust Valve Control Solenoid Circuit (Bank 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0081 Intake Valve Control Solenoid Circuit (Bank 2)
P0082 Intake Valve Control Solenoid Circuit Low (Bank 2)
P0083 Intake Valve Control Solenoid Circuit High (Bank 2)
P0084 Exhaust Valve Control Solenoid Circuit (Bank 2)
P0085 Exhaust Valve Control Solenoid Circuit Low (Bank 2)
P0086 Exhaust Valve Control Solenoid Circuit High (Bank 2)
P0087 Fuel Rail/System Pressure - Too Low
P0088 Fuel Rail/System Pressure - Too High
P0089 Fuel Pressure Regulator 1 Performance
P0090 Fuel Pressure Regulator 1 Control Circuit
P0091 Fuel Pressure Regulator 1 Control Circuit Low
P0092 Fuel Pressure Regulator 1 Control Circuit High
P0093 Fuel System Leak Detected - Large Leak
P0094 Fuel System Leak Detected - Small Leak
P0095 Intake Air Temperature Sensor 2 Circuit
P0096 Intake Air Temperature Sensor 2 Circuit Range/Performance
P0097 Intake Air Temperature Sensor 2 Circuit Low
P0098 Intake Air Temperature Sensor 2 Circuit High
P0099 Intake Air Temperature Sensor 2 Circuit Intermittent/Erratic

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My 1995 Buick park ave dies at 2000 rpm the warning light above the volt guage stays on the warning light above the temp gauge turns on at 2000 rpm if u keep the rpms above 2000 the temp light stays on and...
ALTERNATOR NOT PUTTING OUT ENOUGH VOLTS TO RUN ENGINE. START ENGINE AND TEST BATTERY WITH A VOLT METER SHOULD HAVE 13 TO 15VOLTS OUTPUT.
Read full answer
Oct 31, 2014 • 1995 Buick Park Avenue
0helpful
1answer

Toyota corolla hatch 2002 idle at 2000 rpm when
All the above is normal , except 2000rpm is a little high at idle . can be adjusted down to 1500rpm. the computer adjusts the engine speed . in drive the transmission loads up the engine idle drops to 1000rpm . in park engine unloaded rpm increase all normal.
Read full answer
Sep 17, 2014 • Cars & Trucks
0helpful
1answer

1998 Corolla engine makes a rumble sound from 1000 to 1500 rpm. What would cause this?
Might be worn engine bearings.
Read full answer
Mar 27, 2013 • 1998 Toyota Corolla
0helpful
1answer

Lights on my 2000 buick park ave will not trun off
Hi Julie,your light switch is bad,need a new one.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528004a9df Here's the part.http://www.autozone.com/autozone/parts/1992-Buick-Park-Avenue/Headlight-Switch/_/N-iwix5Z9ciaj
Read full answer
Oct 25, 2012 • 1992 Buick Park Avenue
0helpful
1answer

1992 Buick Park Ave. Ultra TPS problem
The code indicates the TPS is still bad and the code is usually right, but it could be a wiring issue at the TPS connector or less likely a computer issue.
To test the TPS circuit, you need to check voltage and ground from the ECM - 5v is the normal reading between the ECM reference circuit and the ECM ground circuit at the TPS connector. Checking the TPS signal circuit to the ECM requires monitoring the TPS signal on a scan tool while jumping the 5v reference and the signal circuits. The TPS reading should go from high when the circuit is jumpered to low when the jumper is removed.
Read full answer
Feb 10, 2018 • 1992 Buick Park Avenue
3helpful
1answer

High --1600 rpm ?? rpm idle
The normal idle speed is below 1,000 rpm...between 800 to 900 rpm. I suspect that the idle-air control motor has seized and can no longer automatically adjust the engine's idle speed. This part is also responsible for slightly increasing idle speed when the airconditioning is switched on to compensate for the added engine load. Some cars even have a "step-up" solenoid to increase idle.

When replacing the idle-air control motor, remember to clean the port that IAC motor goes into; there will be some carbon build-up that may prevent the part's cone-shaped valve from seating properly. A can of intake valve spray helped along with some Q-tips works well.



Hope this helped.

Have a great day !!!
Read full answer
Apr 07, 2011 • 1992 Buick LeSabre
1helpful
1answer

92 Park Ave stalls, no codes..!
Sounds like the ignition module that sits under the coil packs ... did you ever get any codes out of it when the light was on ?
Read full answer
Jul 29, 2010 • 1992 Buick LeSabre
1helpful
1answer

1979 buick im not sure if it was a park ave or a 5th ave but i need a diagram on how the power steerign and altantor belt goes on i forgot which one goes in forn of the other i replaced the water pump but...
A park Ave. is a Buick and a 5th Ave. is a Chysler the Buick can have 3 different engines so I need to know which engine. The cysler 5th Ave. is a 318 400 or 440 the buick is a 455 350 olds or a 350 chev or a 350 buick. 3.8 buick. The 8th number in the VIN will tell your parts store guy and he shoul be able to prvide the belts and the picture of how they go on. Sometimes the picture is on the fan shrould and sometimes it's on the package the belt comes in ( some gates belts that only fit your car.
Read full answer
Jun 27, 2010 • Cars & Trucks
3helpful
1answer

94 Park Ave Ultra intermittent 'check engine soon light' comes on
It sounds like one of the ignition wires is breaking down or possibly a coil. Get a squirt bottle of water and spray a mist on the plug wires and coil to see if a spark starts to jump out. Probably just a bad plug wire.
Read full answer
Dec 10, 2008 • 1999 Buick Park Avenue
0helpful
1answer

1992 buick park ave
have you replaced your ignition module?
Read full answer
Sep 02, 2008 • 1992 Buick Park Avenue
Not finding what you are looking for?

View Most Popular

1992 Park Avenue

  • Cars & Trucks

Related Question

My 1995 Buick park ave dies at 2000 rpm the warning light above the volt guage stays on the warning light above the temp gauge turns on at 2000 rpm if u keep the rpms above 2000 the temp light stays on and...

  • 1995 Buick Park Avenue

Related Topics

1,552 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to reset Theft Deterrent fuel enable signal

2001 Buick Park Avenue

2000 Park ave - power seat problem

2000 Buick Park Avenue

Oil and transmission pan bolt torque specs

1991 Buick Park Avenue

91 Buick Park Ave won't start

1991 Buick Park Avenue

Why would a 1991 buick park avenue stop running while driving?

1991 Buick Park Avenue

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 1992 Park Avenue Manual

1992 Park Avenue

Loading...