I need to remove the glove box to service the AC blower motor.
Replacing the fan doesn't take many tools, just skill. The fan is under the passenger side dashboard. Remove the cover that is held in with a T25 screw. After removing the screw pry the cover down. Disconnect the light from the cover. Remove the foot vent under the dashboard by pulling it down. Using a 5.5mm socket remove the screws holding in the blower fan. Removing the fan can be very difficult because the main wire harness goes under one edge of the fan. When you get the fan out check it for water damage. When installing the new fan make sure it slides into the channel in the hva/c box. Working around the wire harness can be frustrating. After reassembling check that the fan works. There are 4 places water can leak into the fan. The hva/c water drain can be plugged. The wiper cowl cover at the base of the windshield can be unclipped from the windshield. And one of the two wiper cowl water drains can be plugged.
1,344 views
Usually answered in minutes!
×