SOURCE: Automatic Seatbelt not working properly
underneath the console is a black box with 3 plugs that controls the auto seatbelt operation. The housing on mine was busted and coffee got spilled on the console and got into the controller. Mine did the same thing until i replaced the controller. You can get them at a junkyard fairly cheap. I hope this helps. If you have other questions, you can email me [email protected].
SOURCE: how to remove passenger side mirror
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull off the cover adjacent to the mirror and remove the bolts holding the mirror on. Once the mirror's off, you should see the harness / plug
SOURCE: Where is the fuel filter on a 1997 Saturn SL2?
It is an inline fuel filter under the car in the frame rail up front neat the motor area. It will look similar to this...
On that saturn it has a hose already attached to the fuel filter. It has what they call quick connects on both sides. just remove one side of air intake. (the one closest to firewall of car) where you can get your arm in there. Reach right under fuel filter and grab two white or green tabs with pointer finger and thumb. and squeeze till they make a snaping noice. then all you have to do is reach under fuel filter and pull hose off. Then push the black clips around fuel filter out and it should slide out. The same on the hose already connected to the fuel filter
SOURCE: 1991 saturn sl2 water pump replacement
well first you drain the coolant out at the low point on the radiator, that way it is saved if new. then you take off the right front wheel and remove the plastic access cover from behind the wheel to get to that side of the engine. then you take off the serpentine belt and etc. yes you can do this with the engine still in the car. you may want to consider replacing the serpentine belt and tensioner while you are in that area.
SOURCE: HOW TO REPLACE HEADLIGHT ASSEMBLY 2003 L300 SATURN
there are 3 mounting brackets, go look at some of these on ebay so you will know where they are. one bolt will have to be accessed from underneath. on replacement units you will find it is a two parter, making replacement of that lower bolt much easier. if you put an OEM replacement in there, prepare to pull out the fender liner to get at the lower bolt.
i am putting back a newstarter on a 1992 saturn is the support bracket really needed to reinstall
108 views
Usually answered in minutes!
×