How To Install Replace Grand Cherokee Headlight 93-98 1AAuto.com

Could be as simple as the park light fuse is blown.

Front Turn Signal & Parking Lights



Remove the 2 parking light housing retaining screws ...



... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull



Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb

1. Remove the screws from the lens and separate the lens from the headlight bezel.
   
2. Remove the headlight bezel.
   
3. Remove the screws from the turn signal housing and pull it out.
   
4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
   
5. Installation is the reverse of removal.
   

Side Marker Lights

1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
   
2. Pull the bulb from its socket in the back of the lens.
   
3. Installation is the reverse of removal.
   

Thairs 2 screws under head light and one on top corner of light.

check the wiring and sockets for each bulb in the circuit

look in between the marker and headlights its a screw there screw it out