- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0651 HONDA Code - Sensor Reference Voltage 'B' Circuit ... https://www.engine-codes.com > p0651_honda'P0651 HONDA code possible causes · Faulty Engine Control Module (ECM) · ECM harness is open or shorted · ECM circuit poor electrical connection · Shorted sensor on ... https://www.engine-codes.com/p0651_honda.html
P1454 HONDA Code Fuel Tank Pressure Sensor Range ... https://www.autocodes.com > p1454_hondaOct 9, 2016 - 'P1454 HONDA code possible causes · Faulty Fuel Tank Pressure (FTP) Sensor · Fuel Tank Pressure Sensor harness is open or shorted · Fuel Tank ... https://www.autocodes.com/p1454_honda.html
The P2127 code means that the throttle or pedal position sensor switch E has a low input. The pedal position sensor is a sensor found on the gas pedal. The sensor tells the ECU when the gas pedal is depressed and how far it is depressed.
The P2138 trouble code indicates that the Engine Control Module has detected a malfunction within the D and/or E circuits of the throttle position sensor.
https://www.yourmechanic.com/article/-p2422-obd-ii-trouble-code-evaporative-emissions-control-system-evap-vent-valve-stuck-closed-by-jamahl-walker
take in for repair this is not simple fix.
You have a warranty on your newly car,but here's a video on your problem,take it back,won't cost you anything,but when you take it back,you will know and see if it is the same as what they say,k. Honda Check Engine Light Canister Vent Shut Valve Operation
P2422 Evaporative Emission System Vent Valve Stuck Closed, replace the valve If you have a Hyundai (including Kia), Nissan (including Infinity) or Toyota (including Lexus or Scion) you should disconnect the electrical connector and then apply and remove 12V power to the vent solenoid/valve. The difference between 12V applied and not applied should be the difference between not being able to blow through it and being able to. After testing at least 5 times, if it fails even once, replace the solenoid/valve.
before you go through all that ,, check the gas cap though, with Kia and Hondas,, that code often shows up instead of the P0446 code, which can be solved by re tightening or replacing the gas cap
×