1993 Saturn SL2 Logo

Related Topics:

A
Anonymous Posted on Apr 20, 2014

Adjusting head lights

Vertical adjustment for 2000 Saturn SL2. 2000 wasn't a choice so it says 1993, but my car is a 2000

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 23, 2008

SOURCE: adjust rear brakes on a 2000 saturn ls

The rear breaks have self adjusters on them. If you put the car in reverse and pump the breaks this should adjust the breaks. These are drum breaks correct?

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 18, 2009

SOURCE: My 2001 Saturn SL2 will not start. The car will

changed sprak plugs and spark plug wires.

Anonymous

  • 319 Answers
  • Posted on Mar 20, 2009

SOURCE: 1993 Saturn SL2 will not shift into highway gear

Saturn says and I quote

there transmission fluid is not to be changed after the first change at 6000 miles.

Now I say it should be changed at every 30000 miles. If changing out the fluid doesn't work then you need to go to a transmission repair shop.

Healeyman

mike kirschbaum

  • 1198 Answers
  • Posted on May 06, 2009

SOURCE: need wiring color code for a 2000 saturn SL2 for hooking up a trailer light four pin connector

The trailer wires are left turn, right turn, running lights(the smaller elements on both tail-lights and any side lights) and ground. Energise the corresponding lights and connect the wires accordingly. Find a good ground. A piercing test probe will find the correct wire for you if you can't track it to the bulb.

Anonymous

  • 186 Answers
  • Posted on May 27, 2009

SOURCE: 2000 SATURN SL2 WIPER WON'T SHUT OFF WITH ENG ON

Wiper motor is the problem,the park mode iside the motor logic is bad.The wiper motor will have to be replaced to correct concern.hope this helps

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 Saturn Ion where do I find the headlight adjustment screws.

there is no horizontal adjustment for that model so if your trying to adjust side to side your hosed, there is a adjustment screw on each light for vertical adjustment, be advised there is an actual spec per law when adjusting your vertical spec as to not blind other motorists
0helpful
1answer

Need head bolt torque specs for a 1996 saturn sl

Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.
0helpful
1answer

Cost for valve adjustment for 94 saturn SL2

valve adjustment saturn sl2 1999
  • 0helpful
    1answer
    1helpful
    1answer

    I put a new valve body in a 2001 saturn sl2 because it was slamming when going into reverse now with the new valve body installed i do not have reverse,drive and it will not start in park. what do you...

    possible that the shifting lever to the trans needs adjustment. could be putting car in reverse and not park. try in nutrel to start. i spelled that wrong time to sleep lol.
    0helpful
    1answer
    0helpful
    1answer

    93 sl2 shifts early and hard

    Adjust the TV cable between injector and transmission. Loose the cable at top. Apply full pressure to accelerator. Adjust. Then allow the pedal to return. Do not over pull on the cable. Can damage control plate inside the tranny.
    0helpful
    1answer

    1993 Saturn SL2 won't start

    a blown head gasket is white smoke from the tail pipe, black smoke is a sign that it is running to rich. yourproblem sounds like a timing problem.
    0helpful
    1answer

    1993 SL2 TWIN CAM 4 DR.

    regap the spark plugs dont go by the pregap then go and adjust the timing it will save u in fuel i did the same thing
    Not finding what you are looking for?

    27 views

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...