Question about 2003 Chevrolet Avalanche

Open Question

High pressure in avalanche fuel tank

Pressure releases when gas tank cap removed

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
vetteman3002

Rodney Clark

  • 2299 Answers

SOURCE: 2005 avalanche, check eng light

The gas cap must click three times. This is not a sensor problem, more than likely. More than likely something is stuck in the vent line to the charcoal filter. The charcoal filter could be plugged up. This filter is located next to the fuel fill hose. The hose that runs from the fuel fill to the tank. The charcoal filter is a little black box with hoses going in the top. Sometimes you can hit the box and the debris will pass.

Posted on Oct 21, 2010

Ad

craig

  • 844 Answers

SOURCE: 2004 chevy blazer. can,t pump

your tank is not venting properly. check along fuel line from tank to motor for a pressure relief valve to canister

Posted on Apr 04, 2011

reyals_666

D Casey

  • 95 Answers

SOURCE: i have a 2007 chevy tahoe with lots of pressure when i take gas cap off?

this is rather normal after the car has been warmed up.

Posted on Oct 10, 2012

Anonymous

SOURCE: pressure release from gas tank when removing cap

You have a check light on & pressure when you
remove the gas cap,so the question to you is,
why are you not getting the codes & repairing the
Evap System

Pretty simple I would say !!

Posted on Oct 27, 2012

Anonymous

SOURCE: Service engine light keeps coming on after

There is nothing new there other than your
apparently not checking for codes to diagnose
the Evap System

Posted on Aug 22, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is pressure regulator located 2006 chevy avalanche


pressure regulator ???? For what , fuel system ? ABS etc .... If fuel pressure reg. inside gas tank The fuel pressure regulator is a part of the fuel sender assembly, eliminating the need for a return pipe from the engine. A returnless fuel system reduces the internal temperature of the fuel tank by not returning hot fuel from the engine to the fuel tank. Reducing the internal temperature of the fuel tank results in lower evaporative emissions.

Aug 01, 2018 | 2006 Chevrolet Avalanche

1 Answer

Pressure release from gas tank when removing cap


You have a check light on & pressure when you
remove the gas cap,so the question to you is,
why are you not getting the codes & repairing the
Evap System

Pretty simple I would say !!

Oct 26, 2012 | 2002 Chevrolet Suburban

1 Answer

After traveling, there was high air pressure in the fuel tank? is it normal?


Are you sure is was high air pressure and not vacuum? Most modern automobiles have fuel tank purge systems which will place the fuel tank under low pressure (or vacuum). If you remove the fuel cap immediately after travelling a long distance or while the engine is still running, it could be normal to hear a "hissing" sound when removing the cap as the pressure in the tank will equalize when the cap is removed.

Apr 06, 2012 | Toyota RAV4 Cars & Trucks

1 Answer

Chugging going uphill and smell of gas near the tank


hi no dtc showing if not see if there are any leaks on the fuel tank and pipes especially at the rear then pressure test the fuel system make a note then jack the front up as high as then do a pressure test again see if there is any difference it might be worth your while changing your fuel filter if theres no signs of leaks and pressure test is ok check evap system for sticking valves or pipes off or trapped yates210456

Sep 28, 2008 | 2000 Ford Expedition

1 Answer

Locating the fuel filter


You didn't state the year or engine size,,,, On the firewall,( passenger side, back of engine compartment, it's round) on fuel injected models, relieve pressure of fuel line before beginning- gas cap off,also must release pressure on fuel injected models- some have pressure release on top of filter, others on fuel rail,this will be a bolt on top of a bolt. Hold the bottom bolt (w/ open end wrench, loosen top bolt w/ 6mm wrench. Cover with rag, so you don't have gas shooting up in your face. Carb models: have 2 filters, one inline in engine compartment, 2nd under car attached to fuel tank. Open gas cap to relieve pressure before starting removal on carb models. countrycurt0

Jul 30, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2003 Chevrolet Avalanche Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...