Fix a p1391 code - 2000 Dodge Durango

Both point to a problem with a module rather than a sensor. We have an auto-electrician Expert here and hopefully he will be along. The first thing to do is clear the codes and see if they come back. If they do, you need a good auto-electrician, not a mechanic and not a guy from Autozone.

This tells you what causes P1698.

P1698 JEEP Code - PCM Fault No CCD Message From TCM

https://www.engine-codes.com > p1698_jeep
'P1698 JEEP code possible causes · Faulty Transmission Control Module (TCM) · Transmission Control Module harness is open or shorted · Transmission Control Module ...

This tell you all the items that can cause P1391.

P1391 JEEP Code - CMP or CKP Signal Intermittent Condition

https://www.autocodes.com > p1391_jeep
'P1391 JEEP code description ... The Powertrain Control Module (PCM) monitors the Camshaft Position Sensor (CMP) Or Crankshaft Position Sensor

..

generic p1391 is CMP or CKP Sensor Signal Intermittent Conditions.
p1391 code Ask com YouTube Search this link is codes more for chrysler ---the following codes pertain to your vehicle p1393 is Glow plug circuit low input, bank #2 (left) Open/short/miswired circuit, ... ---- p1391 is Glow plug circuit low input, bank #1 (right) Open/short/miswired circuit, faulty relay, glow plugs.
An Introduction to the Power Stroke Glow Plug System this link will explain and assist in repair

P1391 Chrysler - CMP or CKP Signal Intermittent Condition http://engine-codes.com/p1391_chrysler.html#ixzz3dGwWFAtB
Your other codes are all detailed here:

P0355 Ignition Coil Primary Secondary Circuit Malfunction

Check camshaft and crankshaft sensors and wires leading to them. This code means it the computer isn't getting signal from one or both sensors.

Check connections to crank sensor, then reset your comp by disconnecting your battery cables and holding them together. Make sure to have the code cleared as well.

P1391 (M) Intermittent Loss of CMP or CKP Loss of the Cam Position Sensor or Crank Position sensor has occurred.

P1391 - Electronic Brake controll Rough Road Data Unusable. You need a factory repair manual and a live data scanner to diagnose repair this problem. The cause is far from cut and dry

P1391 means intermittent loss of CKP and CMP , these sensor are monitor when the engine cranking,or running,These can come from a damage flex plate for the cranksensor or damage tone wheel for the camsensor,to a failing cranksensor ,failing camshaft sensor, to even the harness intermittent connnection

p1391 is intermitant loss of signal from crank sensor and cam sensor--change sensors!! change cam sensor first. good luck!! then try it, if still same way. change crank sensor.

P1391: Loss of the camshaft position sensor or crankshaft position
sensor has occurred. This can cause the car to start hard or not start at all. Replace both of these sensor should fix the problem.

P1391=Intermittent loss of CMP or CKP,
Thats the cam sensor or crank sensor,