Question about 2005 Chevrolet Express
Ok when cold misfiring when hot
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Some fuel tanks have a drain **** that will allow you to drain all of
the gas neatly. If you have a drain ****, it will be located at the
lowest point on the tank. Loosen the valve and allow the gas to
If your tank has no drain ****, you'll have to drain it by removing one of the fuel lines. The rubber hose that exits the tank at its lowest point will drain the tank fully. It will either be connected to an electric fuel pump, fuel filter, or to a hard fuel line that goes to the front of the car. Loosen the clamp on the end of the line that connects to the gas tank. Pull the hose off and allow the gas to run out of the tank into your container until it is drained completely.
Posted on Feb 07, 2009
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
Posted on Mar 10, 2010
Fuse block under the hood. Driver's side, under the brake master cylinder. Number 18. TCB#2. Replace the fuse.
There is an under-engineered ground in the reverse circuit. If you back up with the dome lights on, it could blow that fuse. There should be some extra fuses under the cover of the fuse block.
Posted on Aug 05, 2010
Tips for a great answer:
Nov 23, 2017 | 2000 Chevrolet Venture
Aug 27, 2012 | 1997 Chevrolet Cargo Van
Jul 03, 2012 | 2000 Chevrolet Venture
Mar 24, 2011 | 2006 Chevrolet Express
Jul 08, 2017 | 2004 Chevrolet Express
Mar 02, 2017 | 1996 Chevrolet Express
Jan 13, 2009 | 1996 Chevrolet G10
Sep 14, 2008 | 2001 Ford Taurus
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: