ANY IDEAS ON WHERE TO START? WHEEL SPEED SENSOR? ABS MODULE OR PUMP?
First check brake fluid level then you will have to test the wheel speed sensors that the codes refer to. when there is a sensor problem it will activate both the abs and traction control lights. the red brake light comes on when there is low fluid condition(leak),worn brakes that need servicing. also if there is a abs module problem it can set codes. you need to know what the codes mean this is a starting place to diagnoise.
SOURCE: My 2002 Lincoln LS v6
Had the same problem with my 2002 Lincoln LS, it was a bad wheel speed sensor. The right front wheel bearing had some play in it, so I had the hub assembly replaced. The hub assembly comes with a new wheel speed sensor attached. After I replaced the hub assmbly with sensor, the ABS and Traction Control lights went off. No problem since!
SOURCE: Hello, I took my 2002 Lincoln LS to the Ford
The speed sensor is found on the wheel hub. It is the only part which has wires connected to it. Usually you would see hoses for the brakes in that area.
For additional information, I have managed to get a video.
SOURCE: traction conrtol , abs brake lights lincoln ls 2000
it might be a loose abs cable behind one of the brakes?
4,193 views
Usually answered in minutes!
ABS module
×