Battery goes dead fast replaced it four times in the last two weeks and replaced the alternator hsd the starter checked and it passed all the tests in desperate need of help i need to find the best way to check for a perasidic draw i guess im in the process of elimination vehicle is needed very much so, please help
SOURCE: changed alternator in 2000 mpv battery comes on and off
Check the large fusible link labeled ALT in the under hood fuse box. If this fuse gets blown, the alternator wont be able to charge even if it IS new,because the ALT circuit is open.
SOURCE: how do i replace the alternator on mazda mpv 2000?
Remove negative (-) battery terminal from battery. Remove drive belt from alternator pulley. Remove wiring harness (electrical connections) from alternator. Remove attaching bolts for alternator. Pry out alternator. Reverse steps to reinstall.
SOURCE: Check Engine light code 1506
this code indicates under-speed error has ocurred.
sets when PCM detects idle speed is 100 RPM lowerthan expected for 14 sec while break pedal depressedand steering wheel is straight ahead.
possible causes: IAC valve failure,intake leak,throttle body failure,opens or shorts in wiring between IAC and PCM.
SOURCE: need to know the cylinder number locations on a 2004 Mazda MPV
Does anyone know the cylinder number locations??
SOURCE: how do I replace alternator in mazda mpv 2000?
Typically an alternator is an easy fix. It requires removal of the belt from the engine running it, and a few bolts that attach it to the engine.
Because of the engineering with the 2000 mpv, it is a very difficult fix, and one that requires removal of the transaxle and exhaust manifold, as well as removal of the lower engine mounts. It will take a qualified Mazda mechanic 3.5 hours to do the fix - you can (at least) triple that amount of time as a DIY project (assuming you have the right tools).
100 views
Usually answered in minutes!
×