Cars & Trucks Logo

Related Topics:

L
Lori L Harris Posted on May 03, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2000 Ford Mustang Convertible with error code P0411. I first noticed the check engine light come on and I noted some irregular idling, vibration felt in driver's seat, misfire after hard acc

Error code PO411 cannot be cleared by Ford technicians. PCM was replaced as well as 02 sensors, hoses and pipes were checked. The service technicians say they are stumped. After about a month in the shop (still there) they are waiting for an air injection pump? I think that's what they call it. I was sure that the new PCM would be the fix-all for the car but the P0411 code could not be cleared. The repair technician said that the air pump would be the only other remedy and if that doesn't fix the problem, there is nothing else to be done.

1 Answer

magna buff

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Cars & Trucks Master 3,828 Answers
  • Posted on May 03, 2017
magna buff
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 29, 2014
Answers
3828
Questions
0
Helped
1113999
Points
21593

A check valve is located in the air supply line to keep exhaust gasses from flowing into the pump

Read more at: https://www.obd-codes.com/p0411
Copyright OBD-Codes.com

Secondary Air Injection System Incorrect Flow Detected

Read more at: https://www.obd-codes.com/p0411
Copyright OBD-Codes.com

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Apr 13, 2009

SOURCE: 2004 Audi allroad V8 Check Engine Light ON: 65,000 miles.

It can be your CO2 sensor. And another one that all ways makes the check engine light come on is your gas cap be for you turn your car on make sure your gas cap is on like 3 clicks then go clear the codes. If that doesn't help then good luck

Ad

Stealth_Mode

  • 79 Answers
  • Posted on Aug 15, 2009

SOURCE: The check engine light has be checked several-P0411 error.

If were to venture a guess(and i am) it is either a valve or something that regulates either the rate of fresh air or the direction of it. Check the sec air valve or whatever VW calls it for blockage or sticking.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2000 Ford Mustang Convertible with error code P0411. I first noticed the check engine light come on and I noted some irregular idling, vibration felt in driver's seat, misfire after hard acc

Lori,

Your problem is the air pump is pumping air into the exhaust at the wrong time. As far as the dealer telling you it cannot be fixed, tell him to close down, sell his tools and buy a frankfurter cart! The problem is determining which component is failing. Because of the backfire, I would say the pump is good but the device that regulates the air flow or the device that monitors the airflow is faulty. These items can be checked and repaired by any competent technician. I do not think you can do it without a diagnostic scanner and knowledge of what the data should be. I'm sorry but you have to find a good mechanic.
0helpful
1answer

Idle surging down a little when at stop lights in my 2000 mustang 3.8 never dies but seem's close.every 6 to 10 seconds no difference noticed while driving down the road. changed AIC valve for a c

probably cause by the a/c cutting in and out or running at idle . Fit an idle compensator to the system throttle or raise the idle speed 300rpm.
0helpful
1answer

What's the steps to do an idle re-learn on a 2007

Hold the idle at 2000 RPM for 2 minutes then drop it to 1500 for 2 minutes and then 1000 for 2 minutes, then let it return to idle for 5 minutes. Full relearn requires some driving as well, mixed low and highway speed and idle time.
7helpful
2answers

Obd code of p0411 on a 1999 ford mustang 3.8 v-6 what do I check to correct

That's s failure of the secondary air pump. It'll have to be changed. It's an emissions component meant to help with cold start emissions. It won't cause engine running trouble but at inspection time you'll fail for smog. Change it before then and you'll be fine.
0helpful
1answer

Idle it irregular on my 4.6 V8 mustang 2007

DIRTY AIR FILTER AND DIRTY FUEL INJECTORS.PARTIALLY CLOGGED FUEL FILTER.YOU COULD HAVE DIRTY THROTTLE PLATES ON THROTTLE BODY HAS A SLIGHT CARBON BUILT UP AROUND THE PLATES.
1helpful
3answers

2000 Ford Mustang Convertible Slow Top Opening

My 2000 Mustang convertible has a noise and leaks fluid where could i go to fix it
0helpful
1answer

Diagnose

have your co2 switch checked
Not finding what you are looking for?

234 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...