Disarm airbag in chevy blazer

Here's a link Mark on replacing your ignition switch. SAVE 20 GET 10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Here's a link on disarming the system. SAVE 20 GET 10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

YOU HAVE TO REPLACE WHOLE MULTIFUNCTION SWITCH WITH TURN SIGNAL SWITCH, LIGHT SWITCH, WIPER SWITCH HAS TO BE REPLACED.YOU HAVE TO TURN OFF RADIO FIRST THEN REMOVE NEGATIVE BATTERY CABLE.THEN WAIT 20 MINUTES UNTIL AIRBAG IN STEERING WHEEL DISARM.THEN REMOVE THE MULTIFUNCTION SWITCH LOCATED ON THE LEFT SIDE OF THE STEERING COLUMN.YOUR WIPER SWITCH ON THE MULTIFUNCTION SWITCH.

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury

Hi,

Thanks for using FixYa.

There isn't really much that you can do except for call the locksmith. The Chevy blazer has very good anti theft door lock mechanism. Sorry man.

I hope this helps. Have a nice day.

-HotRatchet

Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.

reset the battery wait about five minutes before hooking it up...this is sounding like a computer problem.

there should be 2 or 4 bolts/screws on the back of the steering wheel

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury or death.