At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Coolant Light My Saturn Ion also has 85000 miles on it and the collant light keeps coming on after a few minutes of driving. I check the fluid levels often but it is always full. How much do you think it will cost to get the sensor changed?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First of all your service light came on so give it a service then have the service light reset then check the thermastac, water levels and the choke is working properly and all the elecric working parts are good
Check the collant level in the coolant bottle. If low add coolant. If it is O.K, then you must have a bad coolant level sensor. It is located inside the bottle and is not serviceable, so you need another Coolant Bootle, and it cost about $60. Before replacing, I would try to remoce the coolant bottle and give it a good cleaning with hot water. You can replace it witha new one, or try the luck in a junk yard.
No u didn't blow a gasket. Wut I should ask u is ihow long u ran ur engine when ur collant warning came on? There is a possibility that ur engine overheated or something. Blown head gasket can also cause overheating, but then again it depends on the circumstance. But y do u think ur head gasket is blown?
I had the same problem. My 2004 Ion had 85000 miles on it. It was a bad sensor. The whole coolant reservoir tank needs to be replaced to fix the problem. This was covered under the extended warranty that we had. If you are doing this repair yourself, a hose clamp tool is recommended for simplicity.
I have a 2005 Ion that had been displaying the "coolant" message for quite some time. The car runs perfectly, never overheats and the coolant bottle is always full to the "cold fill level" line when cold and slightly higher than that when hot due to the expansion of the fluid. (all completely normal) I had a strong feeling that the coolant level sensor in the coolant bottle was bad and had read about how it needed to be replaced by a tech and all but I wonderred if there was a way to defeat the sensor since I check my levels all the time anyway because the sensor was really just giving false info anyway. I couldn't find a tread involving a Saturn that talked about a solution other than having a tech charge me lots of money to replace the whole bottle. I found a way to bypass the sensor for a BMW though and thought I would try it. It worked perfectly. I plan on replacing the bottle eventually but right now money is tight and I don't need the sensor to tell me what my own eyes and my car's temperature gauge can tell me for now. Here's how you do it.
1. Unplug the sensor harness from the bottom of the coolant bottle.
2. Find a large paper clip and use needle nose plyers to make a "staple" shaped jumper that is about 1/4 inch wide (about the distance between the two contacts on the harness) and about 3/8 inch long.
3. push the jumper you just made into the end of the harness connector.
4. Start your car and ensure that the warning is no longer displaying. You can also insert the jumper while the car is running (be careful, the coolant bottle will be hot) because the harness is removed from the sensor the coolant warning should already be displayed. When you insert the jumper the message should go away imediately. The coolant level sensor has only one job and that is to tell the computer when coolant is low so you don't have to worry that you may be causing any other problems by doing this. If the coolant light doesn't go away you may have a break in the wire somwhere or a bad connection to the jumper.
5. If all works well, use electrical tape to seal up the end of the harness so moisture doesn't get in. Also it's a good idea to secure the harness to something nearby so that it doesn't flop around when you are driving.
All done. Sorry this was long but I hope that it helps someone. That warning really has been irritating me.
Keep in mind that this method does disable a key safety device that is designed (poorly) to warn you in the even of a coolant leak. Keep an eye on your temperature gauge and check your coolant level regularly. Get the bottle replaced when you can.
×