On this website (link below) you find fuse box diagram and description for Buick Enclave 2014
http://www.autogenius.info/en/buick-enclave-2014-fuse-box-diagram
SOURCE: The hood will not release to open. I released the
So I gather that the release inside the car has release the hood's primary catch, but the T handle is not release the secondary catch to allow the hood to fully open.
If this is the case, take some lithium grease or WD-40 (lithium grease is much better and lasts much longer) and spray it onto the catch assembly.
Try pulling on the T handle some more after a few minutes of the grease soaking in and see of that releases.
If that doesn't work, then take a long flat screw driver and press it against the catch gently hit the screw driver with a hammer (you should be trying to push the catch towards the driver's side of the car)
You may need someone to be pulling on the T handle as you hit the catch with a hammer. I actually had to do this with a jetta before....
255 views
Usually answered in minutes!
×