Old post.
This is really a suzuki G16 engine question
thats ok,
The G16s are used on Suzuki's and Trackers
Vitara's , Esteems, no others world wide.
I have all the photos and books on those cars.
real books and all parts lists. on them , graphics tool.
the freeze plugs (core plugs on all over.)
IN 1996 only one engine, G16b.
But all G16 blocks these are the same.
sides on all G16 base blocks.
2 left side 1 above filter, one just to rear of that, they are huge.
have to be blind to miss left side, (left means same as left car door)
the problem here is there are 2 engines in 1995, then one in 1996
the heads on both engine are NOT THE SAME>
the head is 8v and 16valves heads
and the 16v has freeze plugs in the top ,next to the cam. inside under valve cover !!!.
why not say where the leak is so we can narrow the search. or state the JOB?????????
i have photos of all parts in any G16.
there are no freeze plug in any 8valve head.
but the 16v yes !!!
the 16v head small inside plugs, if leaking turn the engine oil to milk chocolate fast and worse of driven. (just undid worst)
the blocks are the same, both engines, not pistons,
there are no front or rear engine block freeze plugs only side plugs 4 total.
and sure the right side under intake man will be hard to see. look under car right side to see em.
2 left easy to see and 2 right harder.
the right engine block has 2 freeze plugs one in easy view center , under intake man.
and one tucked behind that water manifold that can leak too.
now the last plugs
the 16valve head has a front freeze plug behind the cam cog wheel. and none on the rear of the head.
so 1 front and 3 inside, top.
My guess, G16b has 8 plugs total.
G16a has 4.
things that go POP in the night (cold night)
the rear water outlet fitting (head) does explode every time one runs this head on pure water, frozen, ask my how I know that, and what clueless girl did that,, heheheheheheheheh
SOURCE: four wheel drive will not work on 1995 geo tracker
You need to take the cover off your hub and clean and grease the lock ring. It is attached to the spring. It sounds as though your hub is rusted open.
SOURCE: reset check engine light on 1995 geo tracker
I had the very same problem with my 94 tracker and it turned out to be something simple. My check engine light had popped on after it had hit 100,000. I went through all of the suggestions that people had suggested (unplug battery......etc) and still to no avail. Searching the internet, I came across a website called suzukiforum.com and there, this guy was able to help me with my problem. It turned out to be a maintenance switch that kicks on every 50,000 miles. This switch is like a secret that the auto manufactures use to ploy owners of their cars to bring to the dealer and then rack up the dollars in unnecessary "repairs". The switch is located under the dash and can be hidden anywhere. From the assistance of the guy on the forum, he was able to send me photos of this damn switch and possible locations where it may be mounted. I found mine in about 5 minutes, where it was attached to the steering column. It's a tiny switch, that you slide up or down, depending on what position it is in upon finding it. If it's up, then slide it in the down position and visa versa. Once you do this, the check engine light will go off. Make sure you do not have the car running and you can even unhook one of the battery posts, just to make sure you don't hit anything while rooting around under the dash. Good luck!
SOURCE: 1995 Geo tracker Stereo Unlock Code
If your lucky the code may have been written down in the manuel book. If it's not written down in the book or it's missing, drive to the chevy dealer that sells Geo trackers and the Service adviser can help you unlock the stereo by getting the information from the Vin number.
Good luck and hope this help. http://www.delcolockcodes.com/
SOURCE: My 1995 Geo Tracker heater blower dont run,need to
Hello there the heater blower is located under the hood on the firewall on the passenger side you will see a round motor looking item there this is your motor and blower now if you have checked the fuses for this than make sure that the wires that this motor is connected to are all in good condition if so than yes replace the blower motor
ok best regards michael
Testimonial: "Thank you"
505 views
Usually answered in minutes!
×