Gas Gauge and Odometer Broken

you will have to check to see if the connection is a cable or electronic sensor. If it is a cable loosen the end by the transmission and check to see if it is broken or if the end is stripped if so replace the cable. If it is a sensor you might have to change the speed sensor. good luck

Click on link or copy and paste in your browser: http://www.manualowl.com for free PDF of your model, go to INdex and check out the Troubleshooting section. Hoe this helps, dylen9m.

Chances are the horn is burnt out, the gas gauge will require a new fuel tank gas gauge sending unit and the odometer will require the speedomenter be removed and sent out for repair, the little gear drive for the odometer is broken

There isn't anyway to bypass it. You will to replace cluster to fix the odometer. As for the gas gauge it could be either the cluster or the sending unit in the tank. It is usually the sending unit in the tank but you need to fix the cluster anyway so I would start there.

sounds like someone might have "rolled" the mileage back and srewed all that up taking the instrument panel out. Possible seen it before.

It sounds like a bad connection on the instructment panel itself; however, it may have destroyed the panel by now. The noise that you maybe hearing doesn't sound connected; however, you might try kicking your muffler with your foot and see it that sound could be coming from the muffler since they are notorious for that.

My gas guage, speed odometer and tempiture does not work
The speed odometre is reading 9999999 what should i do

Mine has done this a few times after having disconnected the battery for service. Disconnecting and reconnecting the battery a second time brought them back. A mechanic friend told me it hase something to do with the ECM relearning after having been disconnected. Hope this helps.

Have the computer checked

Problem is in the guage cluster assy.The ODO is mechanical,serviced by replacing guage cluster.