On my 1996 Mazda B3000 I have no dashlights or tail lights but all fuses are good
Tail light switch under the pedal check for continuity
SOURCE: fuse box for 1998 mazda b3000
There are really 2 boxes
Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
fuses
Power distribution box
The power distribution box is
located in the engine compartment
near the battery. The power
distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.
SOURCE: fuse box on 94 mazda b3000
Try testing the brake switch (it is behind the brake pedal) for 12V and continuity between wires when engaged. You can also try checking the brake light relay. It is located on the fuse block.
i hope this helps
-matthew
SOURCE: 1986 Toyota Pickup Instrument lights and tail lights out
Even though the relay is activated,I assumed you checked the out put?Also,You checked the voltage at the light sockets?With a meter,or test light ,check the fuse for the cluster lps,adjust them to dim,and to bright,the meter should act accordingly on the fuse.If it does not,replace the dimmer control,or head light switch,witch ever controls them.This may allow continuity to the tail lights as well.If the fuse is dead for the cluster lights,replacing the dimmer control,or head light switch will solve the problem,or,from another fuse ,supply voltage to the cluster lp fuse,one that is only hot with the key on,cause if you do this the dash lights will come on,every time you run the vehicle,day,or night.
490 views
Usually answered in minutes!
×