When the accelerator is pressed the speed is not encreasing the maximum feedback speed is 40km/h
Run fault codes and check for accelerator position sensor--- check for limp mode operation
SOURCE: No power when accelarator pressed in my Mitsubishi Lancer Evo 4
Are you sure it's getting enough gas? Try replacing the fuel filter, and see what happens.
SOURCE: on starting the engine the engine warning light stays on
i have the same problem need to change ur throttle
SOURCE: my dashboard has stop function ,temperature
check ALL fuses. the ones under the dash{inside the car} and the ones under the hood.see if one is blown
181 views
Usually answered in minutes!
×