- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your service engine light is on, read the codes. It could pin point the problem. Look at the harmonic balancer to see if it is coming apart. You may have a cylinder miss. Lots of possibilities. Here is a post to help you look
TrucksAuthority.comhttps://trucksauthority.com > Blog
The 4.7L PowerTech V8 engine is compatible for the swap with the 1999-2009 model Dodge Durango, Dakota, and Ram 1500. The 5.7L Hemi V8 engine is interchangeable ...
does the engine turn over but not fire up ? or does the engine not even turn over ? either way i would suggest getting the OBD codes read as this will point to any sensors/switchs or circuits that may be causing the fault , please reply with the code numbers and i will be able to help diagnose the problem from there
The Intake Manifold Tuning Valve (IMTV) system is monitored for
failure during continuous, key ON engine OFF or key ON engine running
self-test. The test fails when the signal on the monitor pin is more or
less than an the expected calibrated range
Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
Possible Causes- IMTV signal circuit open, shorted to power or ground. - Damaged IMTV actuator. - Damaged ECM.
When is the code detected?Dual plane intake system-Control solenoid failure
My 07 dodge charger brake light,abs, esp, bas light on an check engine light on an the hand show u how fast u going donāt work I took it to auto zone an they run a check on it an the code showed up u1120 an u1121i replace the rear brake sensors an drove it around the corner but the lights are still on.
The engine light is on because the engine mangement system has been alerted of a malfunction by one or more of the sensors. A diagnostic scan will need to run to determine what codes have actived the light. From those codes repairs needed can be determined. I hope this helps.
Alot thing could be there; first I sugges scanned the PCM (computer) to know excalty what "engine fault code" is stored there; if your engine light turn on, them you have one or more codes there. With this number code, send us and we will give additional details.
Defect in a sensitive measurement of the degree of water radiator heat
solution :
1_check radiator water level 2_ check thermostat if it works or no
×