2004 Mercury Grand Marquis is not an ATV. Reverse on some ATV's has a knob on the handlebar attached to a cable that sometimes goes out of rig. (the cable prevents shifting down past neutral unless pulled)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no transmission.
get the shop manual and read?
the trans has clutch pack for engine then a drive belt.
it is CVT drive, (the pulley magic box)
id check cables first for shifting not too much slack.
the CVT can not go in reverse. so the reverse /forward is downstream from the CVT.
and not wheel bearings, it is this shift box, issue. or just a bad cable, to it etc. are you really owning this> (400 only seems wrong)
2008 Suzuki LT-Z400 . eiger 400, or
if the clutch fails and drags it will not want to shift easy
or the cable is bad, or not adusted, right it can not shift right
look for simple things first
like this, if it does not go forward make sure FIRST the cable even goes to forward mode. (at the end of the cable)
I believe the reverse shift handle hits a switch and a wire comes from that switch ( one is broken or off) and it goes to the trans, typical.. I usually replace the wire and find a place to secure it better
didnt specify atv --generic answer --can rock back and forth and shift out of gear or follow to clutch and use a tool to depress clutch at the bellhousing connections
×