At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would say you have more that one code fault and they just used a cheap scan tool. You need an auto electrician with a pro grade scan tool computer. That is the only thing that can diagnose the engine speed sensor.
What the P0304 code means. The P0304 code will be seen in cars where the ECU has detected that cylinder 4 is not firing properly. The ECU monitors the operation of all cylinders to ensure they are all firing on time, so when one misfires repeatedly, a Check Engine Light is set.
Sounds like you are not getting the full throw of the slave cylinder. If you do not disengage the clutch completely it will shift hard, and sometimes you have to double clutch like you would an old truck. Have whoever put in your clutch bleed the clutch system again.
this may be a compresor issue,when the car is normal(a/c off) the compressor is not draging the engine,how ever when on if the compressor is goin bad(seizing) will turn your engine off and the belt will drag. have you compressor checked and also see if the system is over charged.
I have not had this issue on my Cobalt, but I did encounter it on my 1997 Chevy Blazer.
There is a shift lock interchange that doesn't allow the car to shift unless the brake pedal is pressed in, and won't allow the ignition to be turned fully off if the car is not in park.
To remove my key I used to shift from Park to Drive repeatedly attempting to get the switch to lock in place. While it was very annoying, it eventually worked and the key was able to come out.
Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
Hi SHERRY , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
×