- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ignition System Specifications
Application
Specification
Metric
English
Firing Order
1-6-5-4-3-2
Spark Plug Gap
1.52 mm
0.060 in
Spark Plug Torque
15 N·m
11 lb ft
Spark Plug Type
GM P/N 12568387
Spark Plug Wire Resistance
3000 ohms per ft
Just go to one of the plug manufacturer websites and select your vehicle in the product guide. It will give you the plug and plug gap for your vehicle.
the high humidity (water) is attacking your electrical starting system, whens the last time you changed your spark plug wires , distributor cap & rotor ? how about your fuel & air filters ? cleaned your battery terminals ? try it , it will help !!!!!!!!!
You have to remove the upper applique to remove the tail lamp, it is the trim panel above the lamp. I think it is held in place by two nuts/bolts but not sure. You have to have the rear doors open to remove it
Start with fuel system. Listen for fuel pump humm at fuel tank No humm check wiring to pump for power. Then check for spark at plugs and wires. Remove wire from coil and hold near engine and see arch when you crank. No arch. Replace ignition Modular inside distributor cap or cap or rotor
×