The cruise control on my Z quit working. The light on the inst. panel comes on when you flip the dash switch. But when I push the cruise button on the steering wheel it doesn,t work. The 2nd cruise indicator on the inst. panel doesn't come on. Nor does the cruise engage. I can not find a blown fuse. Is there anything else I could check? If I knew where it is at on the motor maybe I could use a meter on the controller. Can you tell me where this is located?
Check brake switch under dash above the brake pedal. See if sensing wires are broken . or if it uses a duplicate switch sensor check it is engaging properly. Also check you tube on possible failures.
Also in the engine bay the cable from the accelerator petal will attach to the trottle on the engine. Check for another cable at this location from the cruise control and check the cable is not broken .
Check brake globes are functioning and are not blown as well.
SOURCE: Cruise control
Bad relay. They are to the right of the fuses (fuses inside the car). You can see the relays if you open the cover to the fuses (they are big blue cubes), but will need to remove a few screws to remove the panel to get to them. I can't remember which one it is, it might make a clicking noise when you try and turn on the cruise. Or you can swap "matching relays - compare diagram on top" and see what else stop working. I had to replace several, my dash when out, my cruise, and I think one is the fan that blows your ac and heat.
SOURCE: Cruise Control
check the fuse and relay, or you may have vacuum leak at the cruise diaphram.
SOURCE: 95 maxima cruise control doesn't work
He needs to resistance check the control switches and check the brake switch.
SOURCE: my cruise control not engaging
the servo for the cruise is out it located under the hood with a cable going to the throttle body
SOURCE: 03 lesaber cruise lights up on steering wheel an
your igntion switch is bad just happen on my 2003 century little black box were your key goes in
On
this case, to troubleshoot this problem, there are solved help links. Click the
link directly and refer the details to solve this problem yourself, with help
of diagrams: ------
-----------
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html
--------
Horn
and cruise control not working on Plymouth Grand Voyager?
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html
------------------
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html
-------------
http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html
----------
http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html
----------
http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html
--------------
----------
These
will help.
Thanks.
http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html
-----------
Horn and Cruise control quit working?
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html
--------
Horn and cruise control not working on
Plymouth Grand Voyager?
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html
------------------
Horn and Cruise control quit working on 2003
Jaguar S-Type?
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html
-------------
Cruise
Control stops working, Excessive cranks to start the engine and RPM goes max
2500
http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html
----------
Cruise control stop working on 1994 Ford ranger?
http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html
----------
Cruise control not working?
http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html
--------------
1996 Ford Explorer: Cruise Control Wiring
Diagram?
http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html
----------
These will help.
Thanks.
418 views
Usually answered in minutes!
×