Brake lights wont work, only the one in the window fuze and bulb ok

Should all be the same fuze. Check the bulbs and whether the harness to the rear lights that usually runs through the trunk hasn't been pulled.

For starters it is spelled "Brake" light...LOL . Sounbds like you may have a brake light switch that has gone out. In yor owners manual does it show more than one fuse for the brake lights? Most vehicles with a thrid/highmount brake light split the brake light power to either the left and third brake light and the right brake light or vice versa, or posibble 3rd brake light on its own fuse. I would check if all of the brake light including the 3rd brake light dont work. If no lights work at all it leans toward the switch which controls all or them to activate hence the brake light switch. It should be mounted on your brake peal arm or to the main base. The pedal lever activate the switch when you depress the brake pedal.

Power for the brake lights travel thru a light failure sensor which could have failed. The third brake light does not involve the sensor.
If both brake light bulbs have no voltage, the sensor may have failed.

do you have dual filiment bulbs?

If the other parking lights work the fuse is good their all on the same fuse. The socket ( pigtail can be bad and or the wire is broken somwhere. Follow the wire and find its break or disconnection

Is the top center light working (the light at the window)?? If not, check your brake light switch at the brake pedal. It may be damaged or needs adjustment. If the center light is still working, you will need to have the ground and leads checked at the brake lights. Hopefully this helps

I dont have owners manuel and need to know what fuse is my brake lights ? All brakes lights are out . Thank you

If the right brake light is the only one not working, the fuse is okay.
There are not seperate fuses for brake lights and work on a single brake circuit. Chances are the bulb is out. Check the bulb and replace as needed with the same type bulb. If it still is not working after the bulb is replaced, check the power and ground circuits with the correct testing equipment.

could have the wrong bulbs in. some bulbs are single or double filament.check bulbs.if good your bulb sockets could be bad or you got grounding problems.

i would check the bulbs first. then continue to the brake switch