Remote worked when i went to work. truck started sluggess because it was so cold,clock went back to midnight.when igot to work noticed remote would not lock doors,nor would rocker switches work. got home went and had car battery replaced,but switches or remote still not working.checked power door fuse #21 was good. checked and made sure locks and remote programmed,they were,but still do not work
So , the power door locks won't lock or unlock with switches inside the vehicle or with the keyless entry remote fob.??? Is this correct ????
Do you know what a BCM - body control module is ? Do you know what diagnostic trouble codes are ? If not your best bet would be to take your vehicle to a GM dealer or someother qualified repair shop.
DTC B3142 or B3143
The body control module (BCM) provides an output to the driver switch assembly through the door unlock control circuit for controlling automatic door unlock, anti-lockout, and keyless entry unlock functions.
DTC B3152 or B3153
It could be the driver door master switch , could have broken wires inside the rubber boot from the body to the door . Do the power windows work ?
The keyless entry system has the following main components:
• The transmitters
• The body control module (BCM)
When you press a button on a transmitter, the transmitter sends a signal to the BCM. The BCM interprets the signal and activates the requested function.
How did you do this ,,checked and made sure locks and remote programmed,they were,but still do not work ?????
Need a scan tool to program
Important: All key fobs must be programmed each time any one fob is programmed. The scan tool must stay connected until all of the transmitters are programmed.
Install a scan tool and navigate to the BCM Module Setup menu.
Select Program Key Fobs.
Follow the scan tool on-screen directions.
When the programming operations have completed, operate the transmitter functions to verify correct system operation.
SOURCE: Remote Door Lock/Unlock will not work.
At first look, I would have guessed that your battery in the door opener was dead, but that is not the case. I suggest driving to a nearby Chevy dealer and ask one of the salesman if he/she can help. They have always been helpful to me. If not try another one as they are in business to sell not only cars, but service also. They will be your best bet to fixing it. :D
SOURCE: 98 chev 3 door, power door lock switches don't
Try going onto Craigslist and finding a parts truck. You will want to replace the switch itself.
SOURCE: colorado door locks
2005 colorodo driver window and door locks do not work. did work untill i pulled the negative side of the battery trying to reset a problem i had with the door lock alarm going off when unlocking with the pov. everything seems to be o.k. same settings on dic. controls.
SOURCE: 2005 chevy colorado door locks
i disconecter the battery on my 05 colorado and now my electronic switch to lock/unlock does not work and my driverside window doesnt either.... all fuses are good as well ???
257 views
Usually answered in minutes!
×