MISFIRES CODE P0300 NOT A HEAD PROBLEM.BECAUSE NO OVER HEATING NOR WATER IN OIL.COULD IT BE A RELAY. AND/OR KNOCK SENSOR
Code p0300 refers to random/ multiple cylinder misfires detected===causes spark plugs---HT leads---injector/s---ignition coils---low compression ---wiring. Have fuel pressure test done on the fuel manifold to check pump, fuel pressure regulator and filter (low pressure will cause injectors to not work when they should.) ensure that there is space between HT leads as they will cross jump
SOURCE: saturn crankshaft sensor
Right above the started. It can be removed from under the car withour taking the starer out. 5 minute job, one bolt
SOURCE: Oxygen sensor location on a 2003 Saturn Ion-1
One is front of the cat, and one after the cat of the exhaust.
The OBD Scanner should tell you which bank is producing the error.
Bank one is the front one.
Thanks for using FixYa - a FixYa rating is appreciated!!
SOURCE: 2006 saturn ion 2.2L engine code came up for EVAP purge/vent
replace your pvc vavle then have your cars underbody washed
SOURCE: what fuse box and location is the power windows
The fuse box in the 06 ion is under the floor covering on the drivers side seat. Just move the seat all the way to the rear and then starting in the front near the pedals pull up the floor covering which is attached by velcro.
Regards, Joe
148 views
Usually answered in minutes!
×