1996 dodge ram fisher hook up

SOURCE: i have a 2001 dodge

is the head unit hardwired to the battery or to the original harness?? if it is hardwired to the harness detatch it and hard wire it to the batter with a toggle switch under the das that way it will bypass anythign that oculd be cousing a short regular 20 gauge wire will do the trick just make sure that you ground it to something on the frame not the engin or the battery return if it is already hardwired check the connections for the face of the head unit{ that is if it is a removable face if not it stumps me

SOURCE: fisher plow that wont go up and sometime won't turn either way

did you try cleaning the solenoids for the plow? i think this would solve your problem

SOURCE: need wire diagram to hook up trailer lights, truck not factory equipped w/harness,

I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.

Rich Norman

• 502 Answers
• Posted on Dec 14, 2009

SOURCE: hi, I have a 2000 dodge ram and when i plug my

There is a ground that is deteriorated in the harness. trace the ground lead back from the connection to your truck. Once you find the break, that should take care of your problem.

It is also possible to be a power lead, so check them also, but more often than not it is a ground.l

Hope this helps.

SOURCE: Break Light wiring diagram for 1998 dodge ram 1500

haynes repair manual has a brake switch diagrame