REPLACING CRANKSENSOR WHAT IS THE EASIEST WAY TO GET AT AND REPLACE THE CRANKSENSOR ON MY 4.0 JEEP CHEROKEE 1998. I KNOW WHERE IT IS I JUST CAN'T FIGURE OUT HOW TO GET MY HANDS TO IT

Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .

Check this location for Crankshaft Position Sensor...


Fig. The crankshaft position sensor mounts to the rear of the engine block near the transmission.

1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"



Hope this helps (remember rated this).

For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6
8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

there is a cranksensor mounted in bellhousing towards passenger side at top you may try replacing

check fuel and air flow and may be a fuel sensor or an idleing sensor

youtube.com type in 1998 grand cherokee headlight assembly, I just fixed mine in 10 minutes, both of them!

call the dealer and give them your vin number they can tell you.

Check Crank Sensor and Cam Sensor .. Sometimes Oil Cover Cranksensor will Stop Cranksensor from Readig .. Do you have an Oil Leak??

first remave the headlamp and then remove the marker lamp assy.