It could be the safety neutral switch (ignition switch located at the base of the steering column)..try putting it in neutral,reverse,drive then turn the key.could be a fuseable link blown thats connected to the battery cable,could be a starter solenoid,try jumping the solenoid with a screwdriver to see if the starter engages,if not then hit the starter with a hammer,either the bendix cover is rusted out(really typical with 1986-1991)and causing the starter to gum up with rust or oil or dirt so the bendix sticks down,the starter will not spin unless the bendix is up.,or the brushes are worn out and thats what hitting it with a hammer will do,loosen the brushes up enough to start working a little and then you will know if the starter really needs to be replaced.
402 views
Usually answered in minutes!
1990 Ford 150 manual - tried starting - nothing - no lights no crank -d ead - tried to jump it still nothing - battery? or something else that controls power - no zip about engines
engine doesn't turn over when key turned on to start? Any 'click' or sound at all? What engine in your truck?
Any clicking noise, dash lights, headlights? Also try moving shifter through the different gears while trying to start.
×