How to change battery in 2008 dodge avenger - 2008 Dodge Avenger

SOURCE: where is the battery in a 2008 dodge avenger

It is in the drivers side fender well in front of the tire, it is mounted to the front frame rail. You have to remove the plastic fender lining to get to it.

SOURCE: Battery changing

Ok, trust me on this one, take the drivers side tire off and remove the forward inner fender panel. If you try it without removing the tire, it is just a royal pain.

SOURCE: How do I get the "Change Oil " light to go off after change .

Turn key to the run posistion and pump the gas peadle 3 times under 5 seconds.

SOURCE: how do i change the battery on a 2008 avenger

The battery is in the engine compartment, but is not accessible from the top of the engine compartment. You will need to remove the front, driver-side tire and remove the plastic panel in the wheel well. Good luck.

SOURCE: 2008 dodge avenger spark plug location and socket size.

• 2008+ Dodge Avenger 2.4L 4cyl.
• Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
• Once removed you will see 4 black spark plug covers with one hex type screw holding each.
• Remove Hex screw and place aside, pull upward to remove plug boot from plug.
• To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
• Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.