Blower does not work on 2000 ford focus - 2000 Ford Focus

Yes, it is likely an issue with the switch. It you can find the wiring diagram for it, you can test it for continuity with a multimeter.

thats your blower motor resistor its behind the glove box to the left of the blower motor and its blue with a multiplug connector on the end common problem easy fix replace resistor

CHECK BLOWER MOTOR FUSE AND RELAY.SEE IF POWER GOING TO BLOWER MOTOR YOU HAVE FAULTY BLOWER MOTOR.IF BLOWER MOTOR FUSE AND RELAY OKAY.IF NO POWER GOING TO BLOWER MOTOR BUT POWER AT AC AND HEATER CONTROL SWITCH. BLOWER MOTOR HAS POOR GROUND OR AC AND HEATER CONTROL SWITCH IS BAD.

did u check the fuses if they are ok the blower motor is faulty

check fuses then locate resistor and unplug should run on high

the heater blower on my ford focus only works on 1,2,3 it works on 4 can anyone help

Blower resistor/ blower controller.

check for power at the blower motor. then check if it has good ground . ground wire is black/orange and goes through blower switch, then to ground. If you ground the black/orange wire at the motor and it works, you either have a bad blower switch or wire connection (I do not have a diagram for your car, this is based on a 2000 2.0 focus) the wire ends up at the left A pillar. black wire.

try changing the pollen filter.. it could be blocked