I recently rearended someone. I thought my car was fine except the low beams don't work now. High beams, signal lights, and one pair of fog lights work, but not the low beams. How would I go about replacing these bulbs? Where could I find the fuse associated with the low beam lights to be replaced? Or is there something else I'm missing??
Many of the newer vehicles have bulbs that are removed internally, meaning with the hood up. You cannot touch the replacement bulbs with you fingers as the oils from you fingers will shorten its life. Wear gloves or use tissue. The low beam went because they were hot when you struck the other vehicle, when hot they become more delicate.
SOURCE: Low Beams Don't Work!
There is more than one relay I know but make sure your bulbs are good I HAVE seen this happen more than once.. low beams can go at once.. and still have hi beams check this first please .. Jerry
SOURCE: i have a 2001 chevrolet cavalier and the high beam
Sounds like its a problem with the light switch handle. Had it myself as well...
If you're savvy enough around car electronics take out the light switch handle, take it apart, find the problem and fix it. Inside the handle-switch you have several slide-switches and some double action slide switches.
Otherwise - get a different switch from a local junkyard or get a new one from your dealer.
Good luck.
SOURCE: 2000 impala-low beams don't work but high does
sounds like the problem is the dimmer switch, get a price on the dimmer switch. If you have to, get one at a junk yard . It's cheaper.
SOURCE: High Beams, parking lights work. Have NO low beam
had same problem had to replce whole turn signal switch
264 views
Usually answered in minutes!
×