Cars & Trucks Logo

Related Topics:

f
frank Posted on Nov 15, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Bought 1985 500sec ran good shut it off tryed to start a few minutes later wont

Tried starting fluild didn't hit a lick changed coil still not hitting a lick I think it doesn't have any spark cali car with 77,100 miles on it its gas drove it home about 60 miles made a few stops started right up goot home shut it off now wont start ? lost

1 Answer

Bill Boyd

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Cars & Trucks Master 53,816 Answers
  • Posted on Nov 16, 2013
Bill Boyd
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jan 04, 2013
Answers
53816
Questions
7
Helped
11930115
Points
172802

Run fault codes and fix any faulty sensors revealed.

2 Related Answers

fingaz22

michael schultz

  • 1068 Answers
  • Posted on Sep 18, 2009

SOURCE: 1987 gmc jimmy wont start

yea you have no fuel and sound like a bad harness and the gm's are know for there fuel pump harness's! did you change it when you changed the pump? there is a lose connection somewhere in the fuel delivery system and it's pretty simply! i would check the fuel pump relay on the left hand side of the engine compartment and maybe even put power to the pump at the relay position "b" on the fuel pump relay harness and there should be a one pin connector to put power to also connected to the same position on the relay "b" the wire should be tan and white! good luck

Ad

raj somaiya

  • 5370 Answers
  • Posted on Feb 18, 2012

SOURCE: i have a 1990bmw 325i. i turned the car off one

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Motor turns but won't start

Insure you have all wires on correct plugs (use firing order) and if still no spark, test ignition module and coil.
0helpful
1answer

I have a 1977 buick regal with a 350. Had previous problems with this car. Carburetor worn out. Anyway it sat for abt six months and i fixed it. Replaced a 2 bbl rochester with a 4bbl edelbrock. Had...

Hey Anon,
???.. Have you tried a TINY amount of gas through the carb to see if it will start then? If it does.. you know its fuel/carb related. ( I don't care for starting fluid personally).. Did you accidentally hit the distributor (move it/break something) so the timing is very far off?
0helpful
1answer

How can i create an injector pulse on a 1996 cadillac fleetwood vin p which wires on the pcm are for the injectors

Look here ,free wiring diagrams http://www.bbbind.com/free_tsb.html Enter vehicle info. year make model an engine size. Under system click on engine , then under subsystem click on fuel controls . Click the search button then the first blue link .The # 5 & #6 diagrams show fuel injectors
1helpful
1answer

2000ford f-150 xlt v6, hasbeen running rough, went to blow some driveways this morning, it started twice then after the second one it wouldnt start. it didnt hit a lick.

Use a bottle of yellow HEET dry gas / fuel dryer to remove moisture in your fuel tank.

Check the coil + wires for water / moisture drip / wetness.
0helpful
1answer

I just installed a new ignition module started it up and it ran really well....then shut it off and now I have power to everything but it won't hit a lick, what do I do???

When you say power to everything, do you have spark to the plugs ?
Did you check the fuses ?
Was the check engine light on while it was running ?
0helpful
1answer

My van ran hot, and now my blower wont blow ac or heat? and sometimes if you hit the motor real hard it will work for a few minutes?

That is a bad motor, everything you mentioned is a dead give away of a bad motor. like work for a few minutes, starting when you hit it hard. The brush has worn and not making good contact,
0helpful
1answer

1987 gmc jimmy wont start

yea you have no fuel and sound like a bad harness and the gm's are know for there fuel pump harness's! did you change it when you changed the pump? there is a lose connection somewhere in the fuel delivery system and it's pretty simply! i would check the fuel pump relay on the left hand side of the engine compartment and maybe even put power to the pump at the relay position "b" on the fuel pump relay harness and there should be a one pin connector to put power to also connected to the same position on the relay "b" the wire should be tan and white! good luck
0helpful
2answers

My sons 1990 626 ran great. I change the oil and reconnected the speedometer cable that had vibrated loose. took it for a drive to make sure I didn't have any oil leaks. It ran for about 5 minutes and just...

we'll assume fuel is good..leaving spark and air..and management of systems(computer /sensors)...so the speedo cable was disconnected? try taking it loose again , test drive and report back please
Not finding what you are looking for?

151 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...