How to fix engine code of 28 for a 1993 toyota camry le v6..where is the oxygen sensor located for this issue. Thanks
SOURCE: check engine!
normally you need to change the converter if you have smog test you have no choise if not disconnect the battery for a minute and try it out hopefully it will not come back hope its a fixya thanks for the post pierre
SOURCE: 1993 Toyota Camry V6 Timing Settings
Get a T belt from toyota. It has 3 white lines on
it and and arrow mark. 2 lines are solid and one is broken. Put the
arrow facing away from the engine. The cam gears have a dot punched
into them near a certain tooth. This is where the solid white lines
will line up with. The crank gear will have a dot also. It will line up
at 90 degrees from the top, towards the front of the car. This is where
the broken line will match up with. With the belt installed with all
lines on their proper dots and arrow away from the engine, you valve
timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.
SOURCE: Need to locate knock sensor on 1999 camry V6. Where is located.
i have toyota windom 4vz-fe i need locate knock sensor
SOURCE: where is the fuel filter for 1995 toyota camry le ...
left side of engine compartment next to the air cleaner (between air filter box and firewall) bolted to inner fender
SOURCE: thermostat location for 1993 toyota
It is easy....
Grab top radiator hose, follow it to the engine, the hose clamps onto the thermostat housing.
329 views
Usually answered in minutes!
I thought this car only had 2 oxygen sensors. One near the radiator and one near the engine firewall. AM I mistaken. Thanks for taking to answer my question.
×