Question about 1998 Mercury Villager

1 Answer

How to remove the back seat from my 1998 Mercury Villager

Posted by on

  • rico4112b Apr 30, 2009

    Thank you very much

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,388 Answers

It is not designed to be removed. It is designed to slide back and forth as needed.

Section 01-10: Seats and Tracks 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Seat, Rear Bench
Removal

  1. Remove the center seat(s) if equipped. Refer to the procedure in this section.
  1. Slide the bench seat forward to the center row seating position.
  1. Use a flat-blade screwdriver to remove the cover caps from the front of the rear seat cushion latch cover.




  1. Remove the two rear seat bolts from the front of the rear seat cushion latch cover.




  1. Lift the rear seat cushion floor cover on the back of the rear bench seat and remove the two inboard rear seat bolts and the two outboard rear seat bolts.




  1. Remove the bench seat from the vehicle through the body side door opening.

Posted on Apr 30, 2009

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

gerry bissi

  • 4388 Answers

SOURCE: I want to make my 1999 Mercury Villager Sport into

the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.

  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Posted on Mar 10, 2009

Anonymous

  • 117 Answers

SOURCE: Mercury Villager headlight assembly diagaram for removal

it is a bit of a time consuming job it would be best to get a diagram to see where everything goes as this will help you alot otherwise take to a mechanic.
cheers
any feedback left would be great

Posted on Jul 01, 2008

Anonymous

SOURCE: the second seat heater is not working on my 1997

Without the factory workshop manual,
there is nothing you can try

You will need a repair shop or dealer,
that has a data base, to access your
vehicles system schematics

Posted on Feb 28, 2011

Suzy70

  • 1 Answer

SOURCE: Rear seat removal 2000 merc Villager

We have a 1997 Mercury Villager. I don't know how different it is from ours. We cannot remove the back seat. We can remove the middle seat and slide the back seat forward. I hope this helps.

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 mercury villager van, passenger auto seat belt motor running continuously & seat belt won't work. Drained battery. Where is the fuse located?


Engine compartment main fuse panel 30 AMP fuse Fuse #4 scroll down and look at this diagram picture on this link. http://www.autogenius.info/mercury-villager-1st-generation-1993-1998-fuse-box-diagram/ caution, this fuse runs power seats, windows and sun roof as well.

Mercury Villager 1st Generation 1993 1998 fuse box diagram Auto Genius

Oct 15, 2016 | 1994 Mercury Villager

1 Answer

How do I remove rear seat 2002 mercury villager?


Under the seat there are a couple levers move them in opposite direction and see if the seat will move away from the bar it latches to.

Feb 15, 2015 | 2002 Mercury Villager

1 Answer

Are we able to remove the 3rd row seat in the 98 Merc Villager?


Look for the bolts (under the carpet) & remove them, should come right out.

Aug 15, 2014 | 1998 Mercury Villager

1 Answer

How to remove third row seats in 2001 Mitsubishi Chariot


same way as you slight the front seat forwart.lift the bar up underneed the seats

May 30, 2013 | 1998 Mercury Villager

1 Answer

I Have A 1998 Mercury Villager, Is The Bendix On The Starter Supposed To Pop-up when starting engine?


yes, the starter drive should pop out so it can engage with the flywheel teeth

Sep 14, 2017 | 1998 Mercury Villager

1 Answer

I need to know how to put my 1998 mercury villager back in time


First, did you remove and replace the spark plug wires? Second, what size of motor do you have?

Aug 13, 2010 | 1998 Mercury Villager

1 Answer

My 1998 mercury villager have check say obd mil


need more info. was this a state test it failed?

go here for villager expert help.

http://autos.groups.yahoo.com/group/villagerquest/

Jun 13, 2009 | 1998 Mercury Villager

3 Answers

Rear seat removal 2000 merc Villager


fold top seat down first
then there is seat clip push seat forward with upward motion
this releases back floor clamps once released pull seat back this releases the front clamps then pull seat out of back door

Jul 06, 2008 | 2000 Mercury Villager

5 Answers

Mercury Villager headlight assembly diagaram for removal


This is easy. Lift the lid open. Look at the back of the sealed beam and you will see a clip and an o ring. Pull the clip up and pull wires back toward the driver's seat. Unscrew the o ring and firmly pull the bulb out toward the driver again. Note the 3 tabs on the bulb seat and realign the new bulb with those tab ( 2 bottom, 1 top). Replace with #9007 bulbs..do them both.

Jul 01, 2008 | 1995 Mercury Villager

Not finding what you are looking for?
1998 Mercury Villager Logo

Related Topics:

5,584 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...