1994 Chrysler Concorde Logo
A
Ashley qualres Posted on Nov 03, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Troubleshooting My ac is stuck and turns on and off the entire time the ignition is on. The cluster hasnt work since this issue started either. Interior lights stay on when the ignition is off and door is open. Then when the car is on and door is ajar, all the lights flash.

Answer This Question

1 Answer

kevingsuzuki

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Chrysler Master 752 Answers
  • Posted on Nov 03, 2013
kevingsuzuki
Chrysler Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 23, 2010
Answers
752
Questions
0
Helped
311382
Points
2410

Check ur alternator.

Testimonial: "No I knew it wasnt the alternator or any power issues. She drove fine on the road. No problem getting from point A to B just weird and crazy things were happening when the car was on. I went to the Junk yard and pulled the Body control Module out of a Intrepid and s now shes 100% back in business, however, Im guessing the wiper motor just happend to burn up whenever the old BCM shot.... Still no windshield wipers arent anything that Rain X cant fix for the moment. Better than no heat, no working cluster, transmission playing hookie and times, and lights flashing on and off. First I thought it was a wiring shortage or blown fuse. replaced the fuses and checked ground couldn't find anything. The only other common denominator between all my issues was the BCM. Anyhow... thanks"

  • Ashley qualres
    Ashley qualres Jan 15, 2014

    No I knew it wasnt the alternator or any power issues. She drove fine on the road. No problem getting from point A to B just weird and crazy things were happening when the car was on. I went to the Junk yard and pulled the Body control Module out of a Intrepid and s now shes 100% back in business, however, Im guessing the wiper motor just happend to burn up whenever the old BCM shot.... Still no windshield wipers arent anything that Rain X cant fix for the moment. Better than no heat, no working cluster, transmission playing hookie and times, and lights flashing on and off. First I thought it was a wiring shortage or blown fuse. replaced the fuses and checked ground couldn't find anything. The only other common denominator between all my issues was the BCM. Anyhow... thanks

×

4 Related Answers

autodr

autodr

  • 260 Answers
  • Posted on Nov 09, 2008

SOURCE: electrical

that issue is most likely a body control module. if one is replaced, it may have to be programmed by dealer.

Ad

Anonymous

  • 38 Answers
  • Posted on Dec 11, 2008

SOURCE: my 2001 300m wont start

Hi Yes for sure battery not got enough power or is poor connection at the battery but sounds like battery of the two.

Anonymous

  • 2050 Answers
  • Posted on Jul 17, 2009

SOURCE: The doors quit locking and unlocking with key, my

This sounds like a security issue. Look into your manual to see about resetting it.

Jonah Oneal

  • 14092 Answers
  • Posted on Oct 20, 2009

SOURCE: my door open light stays on as do interior lights

MAKE SURE YOUR INTERIOR LIGHT SWITCH IS OFF.IF ALL IS GOOD.YOU COULD HAVE A FAULTY DOOR AJAR SWITCH.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Have 1999 Dodge stratus all the gauges stopped working and odometer reads -no bus- a/c compressor stop working to, they all stopped at the same time.
I'd have to check voltage and ground for the instrument cluster. I noticed one of the fuses for your instrument cluster goes hot with the key on, same thing for ac compressor. I'd have to voltage feed to and from ignition switch for applicable fuse. Check the ignition switch wiring connector. I can't rule out ignition switch itself, at the moment.
There could be other issues?
Ignition switch faults are common on some makes and models.
Instrument cluster wiring connector problems. Sometimes if you disconnect and reconnect the instrument cluster connector, it may start working again, also, cycling the instrument cluster connector may reset, if it starts working, well, it's working for now, may quit again.
Some instrument clusters may do a self test, don't know about yours?
Press and hold odometer reset button, turn key to run position release odometer reset button, watch the odometer. Your indicator lamps may turn on and off, the gages may cycle in small increments. The cluster will exit self test on its own.
You may have to check buss circuits.
Read full answer
Apr 27, 2016 • Dodge Cars & Trucks
0helpful
1answer

Speedometer, cruise light , ac/heater control doesn't work
Sounds like someone needs to do some more troubleshooting first. Changing the cluster is not a simple matter since your mileage will be different. And the cluster is on a different circuit that the ac so one should not affect the other.
Read full answer
Jun 27, 2013 • 2002 Chevrolet Impala
0helpful
1answer

I have a 1993 mistubishi 3000gt vr4 and i was having starting issues is was turning over slower and slower and finally stopped starting no clicking nothing so i got my starter checked and it tested fine so...
CHECK ALL THE FUSES AND BIG RELAYS UNDER HOOD ,IF U INSTALED ALL THOSE THINGS URE SELF MAKE SHURE U DOUBLE CHECK WIREING N HAVE A GOOD GROUND NEXT FOR THE IGNITION SWITCH IF ENTIRE STEARING WHEEL ASSEMBLY WAS REMOVED MAKE SHURE THAT CLUSTER DIDNT GET NOCKED LOOSE N THAT ALL WIREING IS STILL CONNECTED AT CLIPS AND NOT PINCHED SLICED OR DAMAGED AS THE CLUSTER NOT IN OR CONNECTED PROPERLY WILL CAUSE IT NOT TO GET ANY POWER
Read full answer
Dec 27, 2011 • 1993 Mitsubishi 3000GT
0helpful
2answers

Car won't start keys were left in ignition
Try jumping/boosting the vehicle, all of the above will still work with a weak/low battery but the starting system takes a lot of amperage to turn over the engine. If you only left the keys in the car and no lights on or anything running why would it not start if it was starting correctly before??? Whats happened since the car was last started?
Read full answer
Nov 11, 2011 • 2008 Chevrolet Cobalt
0helpful
2answers

My 2004 Chevy Trailblazer's entire instrument panel is screwing up. Basically, most of the time the RPM gauge will go all the way to the bottom past 7 sometimes (when obviously the car isn't running like...
You need to have your insturment cluster repaired !
How to repair GM Instrument Cluster Speedometer Gauge Stepper
Beside stepper motor problems the solder used on these clusters have a problem called silver migration . Can cause all kind of problems ! What this video from eric at south main auto .
Chevrolet Truck Battery Dies Overnight Part II YouTube
Chevrolet Truck Battery Dies Overnight Part


Read full answer
Jun 24, 2017 • 2004 Chevrolet TrailBlazer
2helpful
1answer

Speedometer and Tachometer intermittent, work properly or do not work at all. Owned vehicle since special ordered from factory at end of model year, purchased the full OEM Toyota manuals before ordering...
Possible fault according to your input could be dry points or fault connectivity within the cluster. Try to look for dry solder joints on the sensors which give the input, or clean the connectors using dirt cleaners. As the condition improved after reassembly it cannot be a failure but a fault joint in the electronics. I request you take your time to redo the earlier work with more patience, use a lens to detect any loose connection, if possible use a multimeter to test the continutiy.Good Luck.
Read full answer
Jan 11, 2010 • 1993 Lexus Ls 400
3helpful
3answers

Both speedometer & tachometer not working, both reading wrong.
There was a recent class action law suit settled with GM for this exact problem. You can google gm speedometer lawsuit and get lots of information. Unforutunately for most people I think the warranty was limited to 7 years and 70,000 miles. Which isn't a lot of miles for most people.

If you car isn't covered by the warranty there is a way to "reset" the speedometer.

You can turn the ignition slowly like you are going to start the engine. There is a very small "dead" space where you will see your guage lights go off.

What you want to do is cycle the ignition switch from off to that dead space. Each time you do it your stuck speedometer will move towards zero about 10 mph. So if its stuck on 40 you will have to cycle it at least 4 times.

At first you will probably actually hit the ignition and the engine will try to start.....just release it and try it again.

I know this because I have a 04 avalanche with 80,0000 miles and it has this problem about twice a month.
Read full answer
Jun 02, 2009 • 2004 Chevrolet TrailBlazer
15helpful
1answer

How do you turn off BMW X5 tire pressure light once the tires have been inflated
On some X5's you can do it through the instrument cluster whereas other through the button on the centre console depending on the spec.

On the centre console you'll find the tpc button. It looks like a flat tyre with an exclamation. With the ignition turned off, press and hold this button and turn on the ignition to position 2. You'll notice on the instrument cluster the light go red, yellow, off and then come back on yellow. When the light comes back on yellow release the button and wait with the ignition on until the yellow tpc button goes out. Thats it.

If this hasnt worked you have a different spec and therefore a different way of doing it! Let me know and il guide you through it.

Hope this helps!
Read full answer
May 16, 2009 • 2005 BMW X5
0helpful
1answer

1993 chrysler instrument cluster lights out, headlights flash
sounds like you have a problem with your alarm system. likely the ignition switch is the problem.
Read full answer
May 15, 2017 • 1993 Chrysler Concorde
1helpful
2answers

NO START
This problem can be three things. The ignition switch is a good place to start but its under a recall and you should not spend any money on this repair. The passlock system next to ignition switch should probably be changed at the same time and is also under a recall. The instrument cluster is the most probable in your case. The reason i say that is because the key is the headlights not turning on you may also have some lights on the instrument cluster flickering on and off at weird times.The speedometer or other gauges are probably not working all the time. if you are handy you can remove the cluster and send it out for repair. The tech who repairs this might even tell you that the instrument cluster has nothing to do with non start issue but it does. the passlock anti theft reads the ignition key when you insert it into ignition cylinder. Once you turn the key the ignition sends a signal through the instrument cluster to the pcm. the pcm will allow the car to start if the correct signal is recieved. If the pcm recieves no signal it allows the car to start for a second and then kills the car.
Read full answer
Oct 01, 2008 • 1997 Oldsmobile Achieva
Not finding what you are looking for?

View Most Popular

1994 Concorde

  • Cars & Trucks

Related Question

Have 1999 Dodge stratus all the gauges stopped working and odometer reads -no bus- a/c compressor stop working to, they all stopped at the same time.

  • Dodge Cars & Trucks

Related Topics

85 views

Ask a Question

Usually answered in minutes!

Popular Questions

Car horn doesn't work, airbag light on, but car alarm works

2003 Chrysler Concorde

Cost to replace tie rod ends parts and labour

1999 Chrysler Concorde

Trouble codes P0420 P1681 P0344

Chrysler Concorde Cars & Trucks

How do i remove a battery from a 2002 chrysler

2002 Chrysler Concorde

Windshield wipers are not working. Chrysler 300

1994 Chrysler Concorde

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...