How to reset timing belt light

Service interval light ? Should be alright as long as it still cranks and runs ok . I would check on belt service prices as a precaution .

check this site for all the info
www.hilux4x4.co.za

• Cliford
• Ignition(key) off press odo button.
• Hold odo switch ignition on for 5 seconds.
• Switch ignition off release odo.
• Press odo, switch ignition on and continue holding until light goes off.
• Switch key off and check by starting vehicle.
• The light should now be off .
• You can also veiw links below.
  • "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
    

Toyota Dyna Landcrusier belt light reset

Toyota Hilux 6th generation BELT Light Reset on Denso Instrument Cluster

How to reset D4D belt light

Surely it will be under warranty my advice take it to the dealer tell them to put it right

Not difficult just dirty donkey work involved ,best advice is to put it in a garage unless you have the right tools

Never heard of a timing belt light on a 91 toyota pickup.

I'm assuming that you followed the lamps advice and replaced the timing belt. This indication comes on automatically every 150000km to remind you to replace the timing belt before it breaks and causes catastrophic engine damage. That being said, here is the procedure to reset the lamp for the next time.

2005 3.0 TD Hilux

with key off hold odometer button in while continuing holding button in turn key to the on position release button when fuel light goes out then pushing button in again gives you a series of numbers from 1 - 20 set to 15 (150000km's) and hold button in again until T-Belt light goes out.

It may mean its time to replace the timing belt, how many miles does the odometer show? What does your owners manual say?

how to reset timing belt warning light in a toyota hilux model LN 145