SOURCE: 2006 Chrysler Pacifica touring abs light on stays on
Hi. this light is a warning that concerns the ABS sensor and mechanism assembly. there is a central module and connecting sensors that are attached to each axle/rotor. If any of the sensors become unstable or starts to malfunction, the main module will detect this anomaly and it will trip the light via, the ECM.
I recommend taking this vehicle in so that the ABS techs can diagnosis this issue and they can pin point which sensor or mechanism is malfunctioning.
You vehicle seems to operate in a normal manner at this point but, you will actually have to be in a hard braking situation in order to experience this malfunctions results. If you where to initiate a hard brake while the ABS system is in safe mode(light on), your vehicle would simply lock up. It would not provide the ABS actions due to this malfunction that is evident at this point.
Please rate and god bless:)
SOURCE: 1999 vw jetta vr6 abs light stays on, but brakes work fine
the only way you will find this out is to have a diagnostic machine plugged in and the fault memory read to check what fault is logged, it could be anything from a ABS wheel speed sensor to a control module fault, to save money in the long run i would advise you get the fault memory read first. hope this helps
101 views
Usually answered in minutes!
×