Honda p0847 d for drive blinking

The best solution you'll ge t from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

P0847 HONDA - 3rd Clutch Transmission Fluid Pressure Switch Circuit Short or Stuck ON https://www.autocodes.com/p0847_honda.html

Open the bonnet on the engine bay where you will find the Automatic Gear box.On the top of the gear box you will find the solenoids with some connecting wiring,check whether are correctly connected.,Not well clipped?

A blinking D4 light on a honda is an indicator that the computer has determined there is a fault within the transmission. You would need a scanner to communicate with the pcm and read the fault codes.

Does it have any shifting problems? Hard shift or slipping? If not you may just need the 3rd clutch pressure switch. It will need to come from Honda I don't know pricing but I would think less then $100 and shouldn't take long to replace.

There is some problem with your transmission, get an engine analyser then you can see the error code i.e. telling the problem faced.

make sure the sensor is still plugged in :) it may just need to be replaced. Dont drive until you do, if you can, take to the dealer, should be a less than 200$ fix total.

sounds like you have a bad drive train control module or (dtc) hope this helps !

you need to check the codes for the trans first.
have to contact the honda dealer for a radio code.
needs a clock light bulb.

some problem with the transmition