SOURCE: Saturn Ion 3 Ignition Cylinder Lock
Im thinking your going to be ok as far as warranty repair,if your dealers service dept is insensitive, call Saturn assist @ 1.800.553.6000 On to the ignition switch ....separate colum halves with #2 screwdriver> access ignition housing and look for trip slot on top side of cylinder>use pocket size screwdriver to trip button in slot while in ACC position and pull out...good luck
SOURCE: 2002 Saturn Vue Ignition Cylinder lock problem
The keys on this vehicle have a problem with wearing down to the point where it's a pain to get them to work in the ignition cylinder. Examine your keys for wear and that may have been your problem since day one.
I have a 2004 Vue and I have the only key I got with it (used car) worn down to the point where it will no longer work in the back door and is a pain to use in the ignition cylinder. It also falls right out of the ignition cylinder when the car is running. I have a copy of the key that was made when I got the car which works just fine and doesn't fall out, and looking at the two side by side, you can see that Saturn's key has worn down substantially since I got it two years ago.
SOURCE: 20002 Saturn SL, replaced steering column. How do I...
Try to start the leve key on for 10 min, turn off (wait 10 sec) then try to start again and leve on for 10 min again, turn off and try again wait 10 min, turn off for 30 sec and then start engine.
SOURCE: How do I remove the ignition lock cylinder from a
REMOVAL
INSTALLATION
IMPORTANT:
Actuator blade within ignition module housing must be in ACC position to
install lock cylinder assembly. If rotated, replace it to ACC position,
using needle nose pliers.
Testimonial: "Great information! Thanks for the help. Now I can get the ignition rekeyed to match the doors after the dealer changed the switch."
224 views
Usually answered in minutes!
×