2000 ford focus 2.0 split port camshaft position sensor location

SOURCE: crankcase capacity for 2003 ford focus 2.0 liter split port engine

Hi,

To my knowledge, a 2003 Ford Focus 2.0 SPi engine would need 4 quarts of engine oil (roughly 3.78 liters). Incidentally, the Ford/Cosworth Zeta/Zetec engine would be needing 4.25 quarts (~4 liters).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

SOURCE: How do I replace a camshaft position sensor on a 2000 ford escort

bullshits, the CMP sensor is near the 4 injector, you have to take out all the electric conector near injector 4, take out the 2 screws that hold the fuel rail, sometimes you have to take out the 4 injector for the space, then take out the screws that hold the CMP, lub the o´ring of the new one and reverse this steps.

SOURCE: NEED THE FAN BELT DIAGRAM OF A FORD FOCUS 2000 2.0

replacement belt diagram 2000 ford focuszx3

SOURCE: Where is the camshaft position sensor on a 2000 Ford Explorer?

in the rear like where the dist would normaly be

SOURCE: I got a camshaft position sensor malfunction code P0340.

it sounds like you have bigger problems if your car does not crank(turn over) then your timing belt could have broken and the one piston could be hitting a valve causing it to be locked up.normally when any sensor is bad car engine still cranks it just doesn't start.