SOURCE: Car will not start when cold on first try
its the passlock system. The passlock wire is tiny and fragile, and gets disrupted causing your car to think you are trying to steal it everytime you put your key in.
now you can search for this video on youtube, this is where i learned and ever since i did this i have had NO problem with my car starting for the past 5 months.
you need wire nuts, wire cutters, electrical tape, n socket wrench to take apart steering column
first, go to your fuses, find the airbag fuse and remove it just incase you snip the wrong wire. what you do is look below your steering wheel and take your steering column apart. there are a serious of wires electrical taped together that are plugged in. you peel all the electrical tape back exposing the wires, and you find the WHITE wire. its all white, no other color. This wire is for your Passlock system.... this is the wire that got faulty and is causing the car not to start. now what you do from here is kinda tricky, not too bad though.
Seclude the white wire from the rest, so that you are ready to make your cut. Now, what you do is start your car, leave it running, and while its running you cut the white wire in half. then after cutting the wire, turn your car off, and then turn it back on. it should start right up. Then just put wire nuts on the two ends, and electrical tape them back together
The point of doing this is, one is disables the passlock system completely, and two the reason why you do this while the car is running is because snipping the wire with the car running makes the car think that it got into an accident or something, and puts the BCM/car into a "Fail-safe" mode, making it start every single time no matter what.
i thought this sounded insane at first, but after searching for a couple of hours its the only answer that made sense. and now i am the happiest camper in the world as far as it starting
SOURCE: when i try to start my 2006 saturn ion dash lights
You need to buy a new battery. My 2005 Saturn ion had the same problem. The ECU has to see a certain voltage to crank the starter over.
235 views
Usually answered in minutes!
×