Back right blinker wont work. ive changed the bulbs, checked fuses, but the back right blinker will not work and when that doesnt work neither does the brake light.. i think it maybe electrical but not sure. it always burn the the right wire on the bulb. the lights work just fine, but the blinker and brake light on that side wont work..
check the wiring harness to the right rear tail light assembly, it is located in the back across the rear of the vehicle, do you have some wires there touching ground or metal?check the wiring harness to the right rear tail light assembly, it is located in the back across the rear of the vehicle, do you have some wires there touching ground or metal?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try checking the socket with a mutimeter to make sure your getting voltage to it. If not, change the flasher out with a new one.Its located on the fuse box. That should fixya.
check all bulbs,inspect sockets for corrosion,rust ,or sighns of overload.follow wires and check connectors if all good ,replace the flasher ,,if that doesnt fix it ,the blinker switch in the steering coulmn would be next
have you checked the wire connections to the fround blinker??? when the wire disconnects from the blinker the back blinker blinks faster and the front one doesnt work at all
check with a voltmeter at the bulb contacts while someone is hitting the brakes if there is no current. its the wire they rot and a discovery has daisy chained rear lighting. so if the left or is it the righ is bad. then they both wont work. either way if one goes they dont work. its not hard to run a new wire ive done it for car max a dozen times on these vehicles.
check the wiring harness to the right rear tail light assembly, it is located in the back across the rear of the vehicle, do you have some wires there touching ground or metal?
×